We will try to make motion detector AC lamp with infrared motion sensor (W-01) and AC activated rf receiver with time delay function (S1DA-AC220). The working distance of motion detector is 100m (open field). The detection distance is 10m. The rf receiver is an adjustable time delay receiver. This delay time is often user-selectable which can be adjusted within 0 second~99 hours.
Operation Video:
Question from customer：
Hi I have a 12V powered standalone device that is installed on a carbon fiber ledge (facing up) up on top of a very high carbon fiber mast (50m high) and as you can imagine it’s not ideal to get someone to go up and down the mast to turn this device on/off (or to replace the battery ).
Can you outline suggest a suitable/reliable product of yours to switch my (1 channel) device on/off and has very little demands on the 12V battery (as I need it to last as long as possible by switching it off)?
I’m actually using an 11.1V 5000mA power strip (that could power your relay receiver if has low current demands).
So maybe you can you tell me the receivers power demands to achieve this task please?
Answer：
We recommend the receiver (model 0020290 S1SL-DC12) and the transmitter CB-2 to you. It is the 12 V one channel latched mode remote transceiver. It is also activated by 12V power supply. Paired with long distance transmitter CB-2, its working distance can be 1000m (3000ft). There is no need to go up and down the mast to turn device on and off. Using a remote controller to control device, it is very convenient to you. As regards the latched mode, it is motivated by relay group. For relay group, only one relay will be on at a time. So the big button of this transmitter only turns on the device when you press. And the small button only turns off the device.
We made a demonstration to show how to use this remote controller.
First off all, we prepared the following material.
According to the wiring diagram, lamp is connected to the normally open terminal NO &COM. The lamp should be supplied 12V power supply.
When you press big button on the transmitter, turn on lamp.
When you press small button on the transmitter, turn off lamp.
Question from customer:
I am looking for a long range (1000m theoretically) RF control. The transmitter can be 4 buttons. The receivers should be 12V DC models with 2 channels each and a remote antenna for each receiver.
Our answer:
We recommend 2 channel one to many remote control kit—S2UB-DC12+CB-4. The receiver is designed for one-transmitter-many-receivers system. There are two channels for each receiver. You can use 2 receivers with transmitter CV-4 or CB-4. For the transmitter, we recommend CB-4 to you because the working distance of this transmitter can be 1000m when it pairs with the receiver. As your requirement, you want to add a remote antenna for each receiver. Certainly, you can choose external antennas for them (see the following pictures). With the extended external antennas, the transmitting distance will reach about 2000m in the open air. This kit is also a multi-mode remote control which includes four working modes, toggle, momentary, latched and momentary+toggle.
We should prepare two receivers, one transmitter, 4 lamps, and 12V power supply.
This is the wiring diagram. According to the left side diagram, two led lamps are both connected to common terminals B of two relays and using wires to connect normally open terminals C of two relays. Then, two lamps is supplied 12 V power supply. On the other hand, we should offer power supply to the receiver. Do the same procedure for another receiver.
Press button A, turn on lamp 1; Press button A again, turn off lamp 1.
Press button B, turn on lamp 2; Press button B again, turn off lamp 2.
Press button C, turn on lamp 3; Press button C again, turn off lamp 3.
Press button D, turn on lamp 4; Press button D again, turn off lamp 4.
Question from customer:
I am looking remote controller to control 4 LED light strips. Each of LED lights should be supported a 9V battery and remote controller should control over them individually wirelessly. I was wondering whether your 9V 4 channel wireless relays are favorable for me, basically, I am looking for a way to wirelessly control 4 led lights that draw very little power.
Answer:
We recommend 9V 4 channel multi-mode remote control module to you (S4C-DC09 with C-4). This 4CH RF wireless remote control switch operates in toggle, momentary, latched and toggle + momentary control mode (set the mode as you like freely). You can use it to complete four operations at the same time. For example, turn the light on, open the door or control other dc/ac electrical devices in the meantime. It is applied for light remote control, motor remote control, garage door remote control, gate remote control, etc. The remote control distance is 100m (300ft).
As your requirement, you may set “Toggle mode” that means each led light strip will be controlled on and off by one button. They work individually and wirelessly. No interferences among them.
The following is the wiring diagram. We use four colors to distinguish four LED light strips. Each led light strips’ negative terminal should be connected to the receiver’s negative terminal. Each positive terminal of led light strips is supposed to connect to receiver normally open terminal C. Connect terminals B of receiver to receiver’s positive terminal with wires. At last, switch on the power.
Setting control mode Toggle: Only connect Jumper-2.
Press button 1, warm white color led light strip is on.
Press button 2, the green led light strip is on.
Press button 3, the red led light strip is on.
Press button 4, the white color led light strip is on.
Press button 1 again, the warm white color led light strip is off.
Press button 2 again, the green color led light strip is off.
Press button 3 again, the red color led light strip is off.
Press button 4 again, the white color led light strip is off.
So as the customer said, this remote control is for starting light system to get timing splits from 3 different locations. Then, the first person goes to 1500 meters from the receiver with the first transmitter. The second person goes to 1000 meters from the receiver with the second transmitter and the third person goes to 500 meters from the receiver with the third transmitter.
Each person in different location can remote control the same receiver.
Follow