Remote Control Lights – Page 4 – Remote Control Everything

How to Control 4 Courtyard Lamps

Question from customer:

I am looking for remote control 220v for courtyard lamp use. I need 1 transmitter and 4 canals receivers 220V. The kit will be outdoor, out of house, in the courtyard. I also want the distance for telecommand must be +/- 150 m. Do you have any style of remotes ?

Answer：

We recommend 2000M long range 4CH AC power output remote control kit to you. 4-button transmitter is compatible with 4 channel receiver. One button is to its correspondent channel. You can connect 4 courtyard lamps to receiver. This remote is 220VAC power output so you have not to supply any power to controlled courtyard lamps. With external extended antenna, the transmitting distance exceeds 150m to reach 2000m out of house. So you can rest assured that this remote can meet the telecommand distance.

Operation is very simple.

You may have this following material.

1×4-channel long range receiver

1×4-button long range transmitter

4×AC Lamp(suppose to be courtyard lamp)

220VAC Power supply

Here is the wiring diagram. You can connect 4 AC lamps to “A&B” output terminals of receiver. Then supply power to receiver.

Setting “Toggle Mode” Only connect Jumper-2 with a little jumper.

Press button A, turn on lamp 1; Press button A again, turn off lamp 1.

Press button B, turn on lamp 2; Press button B again, turn off lamp 2.

Press button C, turn on lamp 3; Press button C again, turn off lamp 3.

Press button D, turn on lamp 4; Press button D again, turn off lamp 4.

Video:

Heavy Duty DC Remote for 2 LED Lamps

A new product has added in our online shop. It is 2-channel high power dc remote control kit (S2PX-DC12/24+C-2) with direct dc 12V power output (there is no need to supply power to controlled devices). Maximum current of this remote is 30amp. As for its high power, it includes 12V/24VDC power and excludes 9VDC power. It is applied to controlling lights, motors, fans, electrically operated doors, locks, windows, rolling blinds, cars or other home appliances and industrial devices.

You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.

There are 4 working modes in it. They are Toggle, Momentary, Latched, Momentary + Toggle.

Setting different control modes as you want.

•1) Setting control mode Toggle: Only connect Jumper-2.

Press button 1: Turn on the relay 1

Press button 1 again: Turn off the relay 1

Press button 2: Turn on the relay 2

Press button 2 again: Turn off the relay 2

•2) Setting control mode Momentary: Only connect Jumper-1.

Press and hold button 1: Turn on the relay 1

Release button 1: Turn off the relay 1

Press and hold button 2: Turn on the relay 2

Release button 2: Turn off the relay 2

•3) Setting control mode Latched: Do not connect Jumper-1 and Jumper-2.

Press button 1: Turn on the relay 1

Turn off the relay 2

Press button 2: Turn on the relay 2

Turn off the relay 1

•4) Setting control mode Momentary + Toggle: Connect Jumper-1 and Jumper-2.

Control mode Momentary (Channel 1):

Press and hold button 1: Turn on the relay 1

Release button 1: Turn off the relay 1

Control mode Toggle (Channel 2):

Press button 2: Turn on the relay 2

Press button 2 again: Turn off the relay 2

We have made a show. How to remote control 2 LED lamps by this remote?

Let’s see the following procedure.

1×2-channel high power receiver

1×2-button transmitter

2×LED lamp

1×12V power adaptor

Line

According to the wiring diagram, we only need to wire 2 lamps to the “OUTPUT1&2” terminals of receiver and supply power to” +&-” terminals of receiver.

Controlling light, we usually use “Toggle” mode so we only connect Jumper-2. We will turn on power when we finished connection.

Press button 1, turn on red light.

Press button 1 again, turn off red light.

Press button 2, turn on blue light.

Press button 2 again, turn off blue light.

Video:

100M Latching Remote Control AC Lamp

In daily life, remote control involves in many aspects of life which brings me more convenience. So for example, you want to turn on the basement light from this first floor. Or you want to sit in your living room and turn on your yard light a little far from your house. Or you want to switch on your dock light remotely. This latched RF remote control switch is the solution.

It will be a good choice for you since RF wireless remote control switch system is ideal for turn on / off the house lights, basement light, yard light, dock light and any other kind of light in the range of about 100 meters. You use 2 buttons remote transmitter to control devices. Moreover, you can easily control all DC 0-28V or AC110 ~ 240V other electrical appliance at home! What’s more, the remote control switch is easy to installation and user- friendly.

Let’s make a demonstration. First of all, here is the material.

1×latched remote receiver

1×2-button transmitter

1×AC lamp

Power Supply

According to the wiring diagram, we do some wiring.

After switch on power, press button 1, turn on the lamp.

Press button 2, turn off the lamp.

Operational Video:

How to Remote Control Camper Van’s Flood Lamps by RF Remote Controllers

Question from customer:

I want to use this remote kit to operate 4 ea.-12 volt flood lamps on my camper van from inside my automobile if backing up at nighttime. I would keep one remote in my truck and one in the camper van. Will this be a problem that the remote inside my truck will be at a distance of about 50 feet from the receivers inside the camper van?

Answer:

We recommend you 4 models of high power dc remote switch with direct power output (S1PX-DC12) and 2 long range transmitters (CB-4). Direct power output; controlling lights, motors, fans, electrically operated doors/locks/windows/blinds/cars or other appliances. You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors. When it pairs with the long range transmitter, the working distance will reach 500m (1600ft) in the open field. There is no need to worry about the distance. The most important point is that encoding of receivers is same as the code of transmitters. So they can work together.

Wiring:

The wiring is very simple. According to the wiring diagram, each lamp should be connected to corresponding receiver and place to appropriate position. Each receiver is supplied 12V power supply.

Usage:

There are 3 operational modes. Toggle, momentary and latched modes.

Setting control mode Toggle: Only connect Jumper-2.

Press big button: Turn on the relay.

Press big button again: Turn off the relay.

Setting control mode Momentary: Only connect Jumper-1.

Press and hold big button: Turn on the relay.

Release big button: Turn off the relay.

Setting control mode Latched: Do not connect Jumper-1 and Jumper-2.

Press big button: Turn on the relay.

Press small button: Turn off the relay.

You can choose latched mode since you have two transmitters. As regards the latched mode, it is motivated by relay group. For relay group, only one relay will be on at a time. To be more specific, when you control the light by latched mode, you should prepare at least two buttons remote. Press button A, the light is on; press button B, the light is off.

Button A&B of first transmitter can control the first lamp. Button C&D of the first transmitter can control the second lamp.

Button A&B of second transmitter can control the third lamp. Button C&D of the second transmitter can control the fourth lamp.

12V Remote with Waterproof Case Switch On and Off 2 LED Lamps

A brand new 2 channel 12V toggle remote control kit (S2RX-DC12&C-2) has been added to our online shop now. Wireless control 12V electronics including lights, LEDs, relays, dc motors and other low current devices. You can control receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.

The receiver is installed in a black waterproof case. Six colors‘ wires are connected corresponding terminals inside of the receiver. Wires are bound together and stuffed in black connection wire. The connection wire outside of the case is 20 cm.