We will try to make motion detector AC lamp with infrared motion sensor (W-01) and AC activated rf receiver with time delay function (S1DA-AC220). The working distance of motion detector is 100m (open field). The detection distance is 10m. The rf receiver is an adjustable time delay receiver. This delay time is often user-selectable which can be adjusted within 0 second~99 hours.
Operation Video:
Motion detector is a vital component of security, automated light control, home control, and other useful systems. It is used to detect any moving objects, particularly people. It is usually used in hall gate, corridor or staircase. We will try to make motion detector led lamp with infrared motion detector (W-01) and rf receiver with time delay function (S1DA-DC12). The working distance of motion detector is 100m (open field). The detection distance is 10m. The rf receiver is an adjustable time delay receiver. Delay time can be adjusted as you like within 0 second~99 hours.
Let’s see the following material. We have motion detector, receiver, led lamp, dc 12V power supply.
The wiring and operation pictures are as follows:
Wire the rf receiver to the lamp.
Set delay time: 5 seconds and switch on the power.
Hand moves around the motion detector, the light turns on automatically.
When there is no motion, the light will be off by itself after 5 seconds.
We usually install security system to help us to monitor the farm. Use infrared movement sensor and ac lamp to make a simple security system, for instance. It’s easy to wire and operate. But if the infrared movement sensor is installed at the door of the farm for monitoring, and the lamp need to be placed inside the farm for warning intrusion. There is a long distance between each other. So the sensor cannot be wired to the lamp directly. They need a wireless signal to work together at this time.
The long distance rf remote transmitter CB-2N is strongly recommended here. It has two extended wires. With the connection and disconnection of two wires, the rf remote transmitter can send out an rf wireless signal “ON” and “OFF”. It pairs with rf receiver S1PX-AC220-ANT2, which has long range with external magnetic antenna. Transmitting distance of this transmitter & receiver set is up to 2000m in open field.
As seen in the picture, two wires on transmitter should be connected the contacts of the infrared movement sensor. The output contacts of receiver should be connected to the ac lamp.
When someone breaks into the farm, the contacts of sensor are closed; transmitter is triggered and then transmits an rf wireless signal “ON” to the receiver. After the receiver receives the signal, output contacts are closed; the lamp turns on to warn the emergency.
When someone goes out of the farm, the contacts of sensor are cut; transmitter is triggered and then transmits an RF signal “OFF” to the receiver. After the receiver receives the signal, output contacts are cut, the lamp turns off.
Online shop: www.carymart.com/
Question from customer:
There are 12 match places in our Karate Club. Now I want twelve remote controllers and one 12-channel receiver. Each remote controller is put in each match place. And the 12-channel receiver is put in the First Aid Room. When there is player being injured, we can press the remote to notify the First Aid Room in time.
Answer to the question:
We recommend multi-channel rf remote control system model of 0020192 (S12CA-DC09/12/24 & C-1) to you. It includes twelve remote transmitters and one 12-channel receiver. Each remote controls each channel of receiver. In order to know which place to go, each channel of receiver should be wired to such like small lamp for indication.
Wiring diagram is as follow:
If there is player being injured, press the button of remote, the lamp will be on; the First Aid Room will react swiftly
in the emergency.
Online shop: www.carymart.com/
One of our customer said that he’d like to activate a hot water circulating pump in the upstairs bathroom from his kitchen which required a momentary start signal. The pump had its own power from 110/120V AC and timed operation.
We recommend 1 Channel DC RF Momentary Remote Transmitter Receiver (S1M-DC12 & C-1) to him. The receiver is relay output (normally open and normally closed). Power supply for the receiver and the water pump are different. That means it will not cause electromagnetic interference during water pump operation.
Simple wiring image is as follow:
Press and hold the remote button, he can activate the hot water circulating pump.
Our shop online: http://www.carymart.com
Follow