high power – Remote Control Everything

How to automatically control two AC lamps in Long Range (5000m)

We use a new long range automatic control system to control two AC lamps. This system contains one receiver, one transmitter and magnetic sucker antenna.

Here is the automatic control kit

The automatic remote control kit can be used in agriculture automation, industry automation, and home automation, such as security system, remote control lights, motors, doors/ locks/ windows/ blinds/ cars and various equipments. The working distance of automatic remote control kit is between 1000m and 5000m. The remote control kit has waterproof case with waterproof connectors. The receiver can be installed outdoors. It can control products on land, water and air, especially in a long distance, such as business signs, motorboat, farm, pasture, offshore unmanned operation, field call, remote security alarm, unmanned aerial vehicle, etc.

Firstly we prepare:

1 x 2 channel long range (5000m), high power receiver with Magnetic Sucker Antenna (S2PUW-DC12-ANT2)

1 x 2-button transmitter (CC-2)

2 x DC12v power supply

1 x power adapter

2 x AC lamps

Some lines

Secondly, see the wiring images below; B is normally open terminal; C normally closed terminal and A is common terminal. Connect power to terminal “+” and “-“. Connect two AC lamps to two terminals “A”

Here is the circuit diagram:

Thirdly, it comes to operation

(1) Setting the receiver as Toggle control mode: turn on the first bit of the dip switch.

Control mode Toggle: Press -> On; Press again -> Off.

(2) Setting feedback function: Turn on the third bit of the dip switch.

(3) Press the big button of the transmitter: Relay 1 turns on (connect A and B, disconnect A and C), the lamp 1 is on.

At the same time, the transmitter exudes a buzzing sound like “D~” which means the lamp 1 is on.

Press the big button again: Relay 1 turns off (disconnect A and B, connect A and C), the lamp 1 is off.

(4) Press the small button of the transmitter: Relay 2 turns on (connect A and B, disconnect A and C), the lamp 2 is on.

At the same time, the transmitter exudes a buzzing sound like “D~” which means the lamp 2 is on.

Press the small button again: Relay 2 turns off (disconnect A and B, connect A and C), the lamp 2 is off.

High Power Remote Controller Switch Off/On Motor of Children’s Tractor

Overview:

I’m looking for a High power remote controller to switch on/off the power to my children’s “John Deere ground force” 12v tractor if necessary. According to the specifications on the tractors the motors are 330watt and are driven by 12v battery. 330/12=27.5 amps. So I guess I need a 30amp controller.

Solution:

We recommend the model of 1 channel 30amp 12V remote controller (S1PU-DC12&C-2). Its maximum current output is 30amp. It is suitable for appliances with AC110~240V or DC0~28V because of its normally open & closed relay contact. There are 3 working modes in it. The transmitting distance is about 100m (300ft). It is enough for you.

You can see its wiring diagram. We suggest that you should learn this wiring way. That will be much convenient to you.

Wire tractor’s motor to “A” terminal and negative terminal of receiver. Use a wire to connect “B” terminal and positive terminal of receiver. And wire positive and negative terminal to 12 power supply.

Setting control mode Latched: Disconnect Jumper-1 and Jumper-2.

Control mode Latched: Press -> On, other relays Off; Press another button -> Off.

Press button 1: Turn on the tractor motor, the tractor moves.

Press button 2: Turn off the tractor motor, the tractor stops.

How to Remote Control 240V 25 amps Electric Equipment

Question from customer:

I am looking for an RF switch and transmitter where the switch has a coil voltage up to 12v and the switch terminal can handle 240v and 25 amps. Do you have anything like this?

Answer:

We recommend 1 channel high power remote controller (S1PU-DC12&C-2). The receiver is normally open and closed contact, so you can wire the gadget which is activated by AC 110~240V or DC0~28V. The relay outputs 30amps current for gadget. It meets your needs. The receiver is run by 12VDC, but receiver and controller gadget will be supplied power separately so that they won’t interfere to each other. The transmitter is 2-button type remote. When it works with receiver together, their working distances reach 100m.

Here is the sample of wiring method.

Suppose that we remote control a lamp. The normally open terminals are A&B. The normally open terminals are A&C. Lamp should be connected to A&C terminals. Normally open and closed contact is similar with an ON/OFF switch. The being controlled gadget cannot get power from powered receiver. We should supply additional power to it. We can supply DC or AC power to controlled gadget according to its available power supply.

Toggle mode, momentary mode and latched mode are its working modes.

Setting control mode Toggle: Only connect Jumper-1.

Control mode Toggle: Press -> On; Press again -> Off.

Press button 1: Turn on the gadget

Press button 1 again: Turn off the gadget

Setting control mode Momentary: Only connect Jumper-2.

Control mode Momentary: Press and hold -> On; Release -> Off.

Press and hold button 1: Turn on the gadget

Release button 1: Turn off the gadget

Setting control mode Latched: Disconnect Jumper-1 and Jumper-2.

Control mode Latched: Press -> On, other relays Off; Press another button -> Off.

Press button 1: Turn on the gadget

Press button 2: Turn off the gadget

1CH 30A Remote Control Kit for Pool Light

Question from customer:

On my swimming pool I have a switch to ON/OFF the light(2 x300 watt projectors on a single switch). Do you have any solution so I can remotely ON or OFF this pool light?

Answer:

Our suggestion is that you can use 1 channel AC power&30A output remote switch (S1PX-AC220+C-2). According to the description, it is 1 channel 30A remote controller with direct current output. It is applied for controlling light, motors, fans, electrically operated doors/ locks/windows/ blinds/cars or other appliances with AC100~240V. The working distance is about 100m, but if you want to prolong control distance, you can add an external extended antenna.

The wiring is very easy. Pool lamp is connected to L&N OUT terminals on the receiver. And supply AC power to another L&N terminals of the receiver. You don’t have to supply any current to pool lamp because it can get power from powered receiver.

And you will get a handy transmitter with 2 buttons. We recommend you can set Latched Mode for this controlling. Press button 1, turn on pool lamp; press button 2, turn off pool lamp.

How to Remote Control Dust Catcher

Question from customer:

I want to remote control a motor of dust catcher. It is 1400W, 220V and 6A. I wonder if you have any favorable suggestion for me ?

Answer:

Our suggestion is that you can choose our 1 channel high power ac voltage output long distance remote control kit (S1PX-AC220-ANT2 & CB-2). It is very convenient to you because you don’t have to supply any power for controlled device. Controlled device will get power through receiver when receiver is power on. The maximum current of this kit is 30amp. So it is more than your requirement.

Working distance of remote and receiver set is 2000m (6000ft) in open field if we add external extended antenna in it.

Here is the wiring diagram for your reference.

From the inside structure of dust catcher above, we know that electric motor of dust catcher is connected to OUTPUT L&N terminals. You can set latched working mode. Press big button, motor begins to work. The fan drives rotating brush to absorb dust from intake port to dust bag. You can start to vacuum rooms. Press small button, motor stops working. Vacuum cleaner stops vacuuming. Through this remote control, we can remote control vacuum cleaner on and off.