We use a new long range automatic control system to control two AC lamps. This system contains one receiver, one transmitter and magnetic sucker antenna.
Here is the automatic control kit
:
The automatic remote control kit can be used in agriculture automation, industry automation, and home automation, such as security system, remote control lights, motors, doors/ locks/ windows/ blinds/ cars and various equipments. The working distance of automatic remote control kit is between 1000m and 5000m. The remote control kit has waterproof case with waterproof connectors. The receiver can be installed outdoors. It can control products on land, water and air, especially in a long distance, such as business signs, motorboat, farm, pasture, offshore unmanned operation, field call, remote security alarm, unmanned aerial vehicle, etc.
Firstly we prepare:
1 x 2 channel long range (5000m), high power receiver with Magnetic Sucker Antenna (S2PUW-DC12-ANT2)
1 x 2-button transmitter (CC-2)
2 x DC12v power supply
1 x power adapter
2 x AC lamps
Some lines
Secondly, see the wiring images below; B is normally open terminal; C normally closed terminal and A is common terminal. Connect power to terminal “+” and “-“. Connect two AC lamps to two terminals “A”
Here is the circuit diagram:
Thirdly, it comes to operation
(1) Setting the receiver as Toggle control mode: turn on the first bit of the dip switch.
Control mode Toggle: Press -> On; Press again -> Off.
(2) Setting feedback function: Turn on the third bit of the dip switch.
(3) Press the big button of the transmitter: Relay 1 turns on (connect A and B, disconnect A and C), the lamp 1 is on.
At the same time, the transmitter exudes a buzzing sound like “D~” which means the lamp 1 is on.
Press the big button again: Relay 1 turns off (disconnect A and B, connect A and C), the lamp 1 is off.
(4) Press the small button of the transmitter: Relay 2 turns on (connect A and B, disconnect A and C), the lamp 2 is on.
At the same time, the transmitter exudes a buzzing sound like “D~” which means the lamp 2 is on.
Press the small button again: Relay 2 turns off (disconnect A and B, connect A and C), the lamp 2 is off.
Follow