long distance – Remote Control Everything

Control well pump in long range

We are looking for a wireless remote switch for our well pump at our cabin and I am wondering if one of your products could fit our needs. So quickly, our cabin is situated about 3/4 km from our water well pump. It’s pretty hilly and has trees in the way too. There is electricity at the pump head and right now we have to manually flick a on/off switch at the pump which is filling up the cistern in the house. Right now there is a timer at the pump which we can set so we don’t flood the house if we forget to flick it off. Ideally we would like to have a floating system in the cistern that would tell the pump to turn on/off wirelessly and when low/full or just having start for a small amount of time when low. I added a picture to the email to give you a better idea. Let me know if it’s something you can help us with.

According to the description and picture from this customer, we recommend him to choose model: 0020525. It is an automatic water pumping system.

There are some remarkable characteristics of this new product. We add external extend antenna which makes the transmitting distance of this system as long as 3000m. There are two operation methods of this remote controller. The first method is to control water pump motor with manual controller. The second method is to control water pump motor automatically by two mini water level sensors.

The manual operation is fairly easy. When pressing the big button of the transmitter, CB-2, the “ON” signal will be sent to the receiver. The receiver will instruct water pump motor to pump water into the tank. When pressing the small button of the transmitter, CB-2, the “OFF” signal will be sent to the receiver. The receiver will instruct water pump motor to stop pumping water.

Pumping water automation by water level sensors is the highlight of this product. The key technology is the transmitter, CB-2N-2, which is designed to have 3 external wires. We named them wire 1, wire 2 and wire 3. The three wires will be connected to two mini water level sensors.

Let’s show you how it works.

First step, it is installation.

Put the water level sensor 1 downwards and install at the low water level position; Put the water level sensor 2 upwards and install at the high water level position.

Two wires of the water level sensor 1 are connected to wire 1 and wire 3 of transmitter CB-2N-2.

Two wires of the water level sensor 2 are connected to wire 2 and wire 3 of transmitter CB-2N-2.

Motor should be connected to A&B terminal and L&N terminal of receiver S1PUA-AC220-ANT2.

Second step:

When water reaches the low water level, two wires of the water level sensor 1 is connected and the transmitter is triggered. The transmitter will send an ‘ON”’ signal to the receiver. The receiver will instruct the water pump motor to pump water into the tank.

When water reaches the high water level, two wires of the water level sensor 2 is connected and the transmitter is triggered. The transmitter will send an “OFF” signal to the receiver. The receiver will instruct the water pump motor to stop pumping water.

Online shop: www.carymart.com

The Game of Hunting Treasure used with Firework Ignition System

Someone decided to hold a “Treasure Hunt” game for his friends. So he designed the rule of game. Every participant must find a remote controller according to indication initially. Then participant must find battery in destination. At last, participant will put battery into remote controller and use remote controller to ignite a small firework. Firework ignition regards as “treasure”. That who first can ignite firework means that participant have found the “treasure” which is hidden in advance. He won the game. So he would like to find a favorable product in our online shop.

We recommend him this one channel 6 V long distance firework ignition system 0020377 (S1PS1-DC06-ANT2+1CB-1L). It can ignite various kinds of electric fireworks directly, or ordinary fireworks through fireworks electric igniter, which reduces accidents like skin burn and accidental explosions. The ignitor can be remotely controlled from any place within a reliable distance; wireless signal pass through walls, floors and doors. Working distance of transmitter and receiver with external extend antenna: 2000M /6000ft (theoretically)

The participant can wire small firework to the firework ignitor according to following diagram. Wire firework to black and red terminals of ignitor.

After wiring, participant can switch on firework ignitor. Press button to ignite firework. It is very easy to operate.

Firework Ignition with Mobile Phone WIFI Controller

Mobile phone WiFi is so convenient to us nowadays. What’s more, we think mobile phone WiFi is not only used for internet surfing, but also can ignite firework when you use our mobile phone WiFi controller. It contains WiFi controller with 8 relays (WF-8-1R) and WiFi controller software which should be installed into your mobile phone. When your installed this software, your mobile phone will become the transmitter.

Let’s show you all how to use this mobile phone WiFi controller to ignite firework. Look at the following picture. Material includes WiFi controller, phone, firework, and line as well as 9V adaptor (power supply).

Here is the wiring.

Press WIFI controller software icon and press “Connect” icon. Set Momentary control mode: Press the ▼ icon of channel 1. Choose M (Momentary) control mode.

Press the button to ignite firework.

One Transmitter Controls 4 Garden Goods Shop Lighted Signs

One of our customers has 4 small lighted exterior signs around a garden goods shop building and would like to control all four signs to go on and off by a simple RF system switch. He is wondering whether this is possible or not?

Our suggestion is that he can order 4 receivers for remote control model of S1X-AC220-ANT2 and one grant range remote transmitter CB-4. All lighted signs are respectively installed to each receiver for longer remote distance.

The theoretical transmitting distance is 2000m (6000FT) in the open field. Even though in actual operation, it is hindered by trees, walls or other obstacles, or interfered by other signals. It is still enough for the exterior signs around the building.

4 lighted signs should be wired to 4 receivers’ L&N terminals individually. Wiring diagram as shown below:

Press button “A”, switch on sign 1; Press button “A” again, switch off sign1.

…

Press button “D”, switch on sign 4; Press button “D” again, switch off sign 4.

How to Control Courtyard Light Remotely

You want to light on courtyard light a little far away from your house without having to wire them. Just about 300 feet away. You may wonder if there are fixtures available and this is possible to remote control courtyard light from this scope ?Then long range wireless remote control system is the solution.

It includes a transmitter and a receiver with external magnetic mount antenna.The transmitting distance is up to 2000m (6000 ft) theoretically. The RF signal can pass through doors, walls as well as trees. There is no need to wire for courtyard lights.

You only connect the receiver to courtyard light and wire up according to the following picture.