May 2014 – Remote Control Everything

Activates 12V tractors by 30A high power wireless remote controller

Question from customer:

I’m looking for a High power remote controller to switch on/off the power to my children 2 “John Deere grond fource” 12v tractors if necessary. According to the specifications on the tractors the motors are 330watt and are driven by 12v battery. 330/12=27,5 amps. So I guess I need a 30amp controller.

Answer:

We recommend the high power wireless remote control facility to you. It is model: S1PU-DC12/24 & C-2. The receiver (S1PU-DC12/24) is high power and working current is 30A. The transmitter (C-2) is 2 channels and remote control distance is 100m/300ft theoretically. You can connect motor of tractor to receiver and use the wireless transmitter to remote control motor rotate and activate tractor runs.

Here is the circuit diagram of receiver. You can connect motor to “A & B” terminal of receiver. Then supply power to receiver. When you press the button of transmitter, the motor will rotates and activate tractor runs by wireless remote control.

The wireless remote control facility has three control modes: toggle, momentary, latched. You can set any one of three modes as following operation process:

When you only connect Jumper-1, it is toggle mode.
Control mode Toggle: Press -> On; Press again -> Off.
Press button 1: Turn on motor, tractor runs (connect A and B, disconnect A and C)
Press button 1 again: Turn off motor, tractor stop (disconnect A and B, connect A and C)

When you only connect Jumper-2, it is momentary mode.
Control mode Momentary: Press and hold -> On; Release -> Off.
Press and hold button 1: Turn on motor, tractor runs (connect A and B, disconnect A and C)
Release button 1: Turn off motor, tractor stop (disconnect A and B, connect A and C)

When you disconnect Jumper-1 and Jumper-2, it is latched mode.
Control mode Latched: Press -> On; Press another button -> Off.
Press button 1: Turn on motor, tractor runs (connect A and B, disconnect A and C)
Press button 2: Turn off motor, tractor stop (disconnect A and B, connect A and C)

Finally you can also enter into the website and search the wireless remote control facility as following:

Model: 0020014 (S1PU-DC12/24 & C-2)

Website:

http://www.carymart.com/1channel-dc12v-24v-30a-high-power-wireless-remote-cotrol- for-electric-gadgets-315-433mhz-p-160.html

RF website:

http://www.rfcontrolsystem.com/index.php?main_page=product_info&cPath=360_244_264&products_id=160

Vibrating Beep Kit for Disabled Person

Overview:

I am looking for a system that would allow my father to alert severely disabled mother when the latter is not in the same room. Maximum range 100 m sought. The button must be easy to use. The receiver must fit in a pocket.

Solution:

We recommend a feasible solution to you. The vibrating beep receiver with three working mode (Z-06) and 500m radio transmitter (CP-1) are suitable for you. There are three working mode for this kit. Your father can switch all of them freely as he want. They are vibration mode, beep mode and vibration mode &beep mode. When the receiver is assigned to transmitter (CP-1), the whole kit’s transmitting distance is about 500m. The receiver and transmitter are small enough for your father to put it into pocket or hold it in hand. So you don’t have to worry about how to alert your severely disabled mother.

Here is the usage.

You should learn remote control:

1 Press and hold the learning button of the receiver for about 5 seconds, then release the button when LED light is on, the receiver is in the status of learning.

2 Press button of remote control within 10 seconds, if LED light flickers twice then off, it means learning is successful.

Those three working mode will be appropriate for different situation.

Vibration mode: Press the button of transmitter, the receiver vibrates for 5 seconds. If your mother doesn’t carry the receiver to her pocket at times, your father had better switch to beep mode or beep &vibrating mode in advance. He can press button of receiver to switch to beep mode or beep& vibrating mode. He presses button of transmitter, the receiver will beep or beep and vibrates together for 5 seconds. It depends on the working mode your father chooses.

This kit is easy to use. So you can rest assured that your father will alert your mother successfully with the help of those items.

High Power Remote Controller Switch Off/On Motor of Children’s Tractor

Overview:

I’m looking for a High power remote controller to switch on/off the power to my children’s “John Deere ground force” 12v tractor if necessary. According to the specifications on the tractors the motors are 330watt and are driven by 12v battery. 330/12=27.5 amps. So I guess I need a 30amp controller.

Solution:

We recommend the model of 1 channel 30amp 12V remote controller (S1PU-DC12&C-2). Its maximum current output is 30amp. It is suitable for appliances with AC110~240V or DC0~28V because of its normally open & closed relay contact. There are 3 working modes in it. The transmitting distance is about 100m (300ft). It is enough for you.

You can see its wiring diagram. We suggest that you should learn this wiring way. That will be much convenient to you.

Wire tractor’s motor to “A” terminal and negative terminal of receiver. Use a wire to connect “B” terminal and positive terminal of receiver. And wire positive and negative terminal to 12 power supply.

Setting control mode Latched: Disconnect Jumper-1 and Jumper-2.

Control mode Latched: Press -> On, other relays Off; Press another button -> Off.

Press button 1: Turn on the tractor motor, the tractor moves.

Press button 2: Turn off the tractor motor, the tractor stops.

AC 220V motor wireless controller with transmitter & receiver remote a winch

Question from customer:

I am looking for a wireless remote to control a winch (forward, reverse, momentary contact).Switch a 120 V or 220 V 1/2 HP motor.

Answer:

We introduce the wireless remote control device to you. It is model: S1FM-AC220 & CV-2-2. The receiver (S1FM-AC220) can control motor positive rotation and reversal rotation. And the working voltage is AC 100~240V. The transmitter (CV-2-2) is 2 channels and remote control distance is 500m/1500ft theoretically. You can connect motor of winch to receiver and use wireless transmitter to remote control the motor rotates.

Here is the circuit diagram of receiver. You can connect AC motor of winch to terminal “UP”, “COMMOM” and “DOWN” in the receiver. Then connect live wire to terminal “L” and neutral wire to terminal “N” for supplying power to receiver. When you press the button of transmitter, the motor will rotate and activate winch run by wireless remote control.

The wireless remote control device is momentary control mode. You can operate as following process:

When you press and hold button ▲ on remote or receiver: Terminals UP and COMMOM directly output AC110V / AC220V; motor rotates continuously in positive direction.
Release button ▲ on remote or receiver: Stop the motor.

When you press and hold button ▼ on remote or receiver: Terminals DOWN and COMMOM directly output AC110V / AC220V; motor rotates continuously in reversal direction.
Release button ▼ on remote or receiver: Stop the motor.

Besides you can also enter into the website and know more something about the wireless remote control device.

Model: 0020325 (S1FM-AC220 & CV-2-2)

Website:

http://www.carymart.com/ac-100240v-motor-momentary-remote-control-transmitter-receiver-p-1505.html

RF website:

http://www.rfcontrolsystem.com/index.php?main_page=product_info&cPath=255&products_id=1329

2 Channel AC 220V Remote Controller Controls Outer and Inner Sliding Gates

Overview:

I wish to run my outer sliding gate and my inner sliding gate, I would use a single remote control to operate both gates.

Solution:

You can use a transmitter with two buttons (C-2) to control two 1 channel AC receivers (S1U-AC220), one button controls one receiver. Convenient compact design of this RF wireless remote control switch system – includes 1 transmitter & 2 receivers. It is very distinguished and the high quality. This switch can be applied to your lights, air conditioners, televisions, fans, doors, power locks, electric windows, electric curtains, etc. … all DC 0-28V or AC110 ~ 240V electrical appliances! The remote control is really fashionable and practical.

The wiring is very simple.

Wire gate motor to normally open &closed contact and “N” terminal. Wire “C” terminal and “L” terminal. Add wire to “N” terminal. Your gate motor can share power supply with receiver by this way.

Setting control mode Momentary: Only connect Jumper-1.

Control mode Momentary: Press and hold -> On; Release -> Off.

Press and hold button 1: Turn on the relay, open the outer sliding gate.

Release button 1: Turn off the relay, close the outer sliding gate.

Press and hold button 2: Turn on the relay, open the inner sliding gate.

Release button 2: Turn off the relay, close the inner sliding gate.