Vibrator Application – Remote Control Everything

Long Range Vibrating and Beep Alerts Kit

Vibrating alerts are primarily used when a user (deaf people or aged people) cannot hear the ring tone (a noisy environment or through hearing difficulty) or want s a more discreet notification. Vibrating alerts is used in mobile phones. If you put vibrator to a hard surface, it will be louder than a ringtone. In fact, we integrate vibration and beep function into one item. So we’d like recommend this kind of 1000m rf tri-mode wireless vibrator kit (12Z-06 & CB-12). It includes 12 vibrators and a 12-button transmitter. This vibrator kit’s transmission distance is about 1000m. There are four working modes in them. They are vibration, beep, vibration and beep.

Here is the usage of vibrator kit.

The first step is learning.

1) Press and hold the learning button of the receiver(vibrator) for about 5 seconds, then release the button when LED light is on, the receiver (vibrator)is in the status of Learning.
2) Press button of remote control within 10 seconds, if LED light flashes twice then off, it means Learning is successful.
If LED light is off after 10 seconds, it means Learning is failed and the receiver quits the status of Learning.
3) The receiver (vibrator) can learn several remote controls of different codes.

So the receiver (vibrator) will learn transmitter’s signal from its button 1 to button 12.

The next step is controlling.

Vibration mode: Press the button of transmitter, the receiver vibrates for 5 seconds.

Beep mode: Press the button of transmitter, the receiver beeps for 5 seconds.

Vibration & Beep mode: Press the button of transmitter, the receiver vibrates and beeps together for 5 seconds.

Changing modes: As long as press the button of receiver, you can switch those three working modes optionally. Such as press the button of receiver, switch to beep mode from vibration mode; press the button of transmitter again, switch to vibration & beep mode; press the button of transmitter again, switch to vibration mode.

Each button of transmitter can control one receiver.

Vibrating Beep Kit for Disabled Person

Overview:

I am looking for a system that would allow my father to alert severely disabled mother when the latter is not in the same room. Maximum range 100 m sought. The button must be easy to use. The receiver must fit in a pocket.

Solution:

We recommend a feasible solution to you. The vibrating beep receiver with three working mode (Z-06) and 500m radio transmitter (CP-1) are suitable for you. There are three working mode for this kit. Your father can switch all of them freely as he want. They are vibration mode, beep mode and vibration mode &beep mode. When the receiver is assigned to transmitter (CP-1), the whole kit’s transmitting distance is about 500m. The receiver and transmitter are small enough for your father to put it into pocket or hold it in hand. So you don’t have to worry about how to alert your severely disabled mother.

Here is the usage.

You should learn remote control:

1 Press and hold the learning button of the receiver for about 5 seconds, then release the button when LED light is on, the receiver is in the status of learning.

2 Press button of remote control within 10 seconds, if LED light flickers twice then off, it means learning is successful.

Those three working mode will be appropriate for different situation.

Vibration mode: Press the button of transmitter, the receiver vibrates for 5 seconds. If your mother doesn’t carry the receiver to her pocket at times, your father had better switch to beep mode or beep &vibrating mode in advance. He can press button of receiver to switch to beep mode or beep& vibrating mode. He presses button of transmitter, the receiver will beep or beep and vibrates together for 5 seconds. It depends on the working mode your father chooses.

This kit is easy to use. So you can rest assured that your father will alert your mother successfully with the help of those items.

50M Remote Control Reminder to Train Dog

Question from customer:

I would like to know which kind of vibrators will be strong enough to alert a deaf dog? I’d like to hook it to a collar and use it to train the dog and to also alert him.

Answer:

We recommend you 50M RF remote control reminder with 4 Vibration Modes (Z-02&CS-4). This remote vibrator has two parts: vibration receiver and transmitter. It is small enough for you to carry in the pocket. Press the button on transmitter and the receiver will vibrate to alert. The receiver can be controlled by transmitter from any place within a reliable distance; wireless signal pass through walls, floors and doors. It is suitable for person or animal with hearing impairment.

With antenna, its transmitting distance is about 50M. There are vibrator, LED indicator, battery, and learning button in the receiver.

The first step is deleting and learning codes:

1 Delete all stored codes:

Press and hold the button of the receiver for about 2 seconds until LED light is off, then release the button, all stored codes have been deleted successfully. At this time, the transmitter cannot control the receiver.

2 Learning remote controls:

Press the learning button of the receiver, LED light is on, the receiver is in the status of LEARNING.

Press any button of remote control within 7 seconds, if LED light flashes twice slowly then off, it means LEARNING is successful. If LED light is off after 7 seconds, it means LEARNING is failed and the receiver quits the status of LEARNING.

The second step is operation:

The receiver can learn several remote controls of different codes.

Press button A: The receiver vibrates once.

Press button B: The receiver vibrates twice. Press button C: The receiver vibrates three times. Press button D: The receiver vibrates four times.

When you press the button on transmitter, the receiver will receive the wireless signal and vibrate. Then the dog can feel the vibration.