rf remote control – Remote Control Everything

AC Motors are Controlled by DC Remote

Nowadays, motors are found in applications as diverse as industrial fans, pump, household appliances, tools and other devices, which can be powered by direct current (DC) or alternating current (AC) source. Of course, we can also remote control motors of those devices above to switch on or off of devices, even the forward-reverse rotation. When you want to control many motors with one transmitter, we think multi-channel remote control is very favorable.

8 channel dc triggered RF remote transmitter & receiver operates in 8 working modes. It can be used to control at most 8 on / off electrical devices. With characteristics of strong anti-interference, reverse power protection and over current protection. Three voltages dc9v, dc12v and dc24v are provided to choose. It is widely applied to control every kind of lights, electrically operated doors / gates / windows / blinds and so on.

Would you like know how to control 2 ac motors with an 8-channel dc triggered remote? Look at the following show.

First off all, we prepare material.

1×8CH rf receiver

1×8-button transmitter

2×AC motor

Some lines

Power supply 220V

Here is the wiring diagram. This is the AC motor’s wiring. Motors should be connected to common terminals of B. We add neutral wires to connect both motors since they are ac motors. Live wires are connected to normally open terminals of C.

We suggest setting “Momentary Mode” for motor control. Only connect Jumper-1. It is an easy operation.

Press and hold button 1, motor 1 rotates in positive direction. Release the button, motor stops.

Press and hold button 2, motor 1 rotates in reversal direction. Release the button, motor stops.

Press and hold button 3, motor 2 rotates in positive direction. Release the button, motor stops.

Press and hold button 4 , motor 2rotates in reversal direction. Release the button, motor stops.

Operational Video:

100M Latching Remote Control AC Lamp

In daily life, remote control involves in many aspects of life which brings me more convenience. So for example, you want to turn on the basement light from this first floor. Or you want to sit in your living room and turn on your yard light a little far from your house. Or you want to switch on your dock light remotely. This latched RF remote control switch is the solution.

It will be a good choice for you since RF wireless remote control switch system is ideal for turn on / off the house lights, basement light, yard light, dock light and any other kind of light in the range of about 100 meters. You use 2 buttons remote transmitter to control devices. Moreover, you can easily control all DC 0-28V or AC110 ~ 240V other electrical appliance at home! What’s more, the remote control switch is easy to installation and user- friendly.

Let’s make a demonstration. First of all, here is the material.

1×latched remote receiver

1×2-button transmitter

1×AC lamp

Power Supply

According to the wiring diagram, we do some wiring.

After switch on power, press button 1, turn on the lamp.

Press button 2, turn off the lamp.

Operational Video:

12V Remote Control for 2 AC Motors

Electric motors are everywhere, even computers have electric motors to power its cooling fans and hard disks. But, today we will talk about remote controlling AC motor by DC remote controller. Then this 6CH RF wireless remote control switch operates in toggle, momentary, latched and toggle + momentary control mode (set the mode as you like freely). You can use it to complete six operations at the same time. For example, turn the light on, open the door or control other dc/ac electrical devices in the meantime. It is applied for light remote control, motor remote control, garage door remote control, gate remote control, etc. Its transmitting distance can reach 500m (1500ft). Three voltages include dc9v, dc12v and dc24v.

We will try to show you how to control positive and reversal rotation of two AC motors with this remote module. We will use four of all relays. Let’s see the following material.

1×6CH rf receiver

1×6-button transmitter

2×AC motor

Some lines

Power supply

We suggest setting “Momentary Mode” for motor control. Only connect Jumper-1. It is an easy operation.

Press and hold button 1, motor 1 rotates in positive direction. Release the button, motor stops.

Press and hold button 3, motor 1 rotates in reversal direction. Release the button, motor stops.

Press and hold button 2, motor 2 rotates in positive direction. Release the button, motor stops.

Press and hold button 4, motor 2 rotates in positive direction. Release the button, motor stops.

Operational Video:

Ignite Light in Beacon by Remote Control

In ancient time, beacon is fire or smoke which is made in the beacon tower to alert fellow soldiers for military purpose. Nowadays, beacon is usually built at the dock or located on the water to help guide navigators to their destination for safety purpose. If you were the beacon tower administrator, did you think about remote controlling of light in beacon tower? Someone said,“I’m looking for a system which can remotely control (200m max) ignition of a beacon in 24 V dc”.

We recommend him the model of single channel 24V power output RF remote (S1X-DC24-ANT2 +1CB-2). Single channel is for one device. 24V direct power output can supply power directly to the device which is controlled. User can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors. The receiver, which mounts long range magnetic antenna, pairs with long distance transmitter to reach to 2000m in the open field.

There are 3 control modes. They are Toggle, momentary and latched.

Setting control mode Toggle: Only connect Jumper-2.

1) Press big button: Turn on the relay.

Press big button again: Turn off the relay.

2) Setting control mode Momentary: Only connect Jumper-1.

Press and hold big button: Turn on the relay.

Release big button: Turn off the relay.

3) Setting control mode Latched: Do not connect Jumper-1 and Jumper-2.

Press big button: Turn on the relay.

Press small button: Turn off the relay.

As regards controlling beacon, we suggest the latched mode. Press big button to turn on beacon light, press small button to turn off the light.

For the wiring, it is so simple. The following picture shows. Lamp is connected to terminals A&B on the receiver. The receiver should be supplied 12V power. There is no need to supply power to lamp because lamp can get power from the receiver.

Remote Control Firework Ignition

We have introduced the firework ignition with remote control or firework ignitor system in previous period. Now we try to use 9V direct power output remote control to set off firework. Besides reducing accidents like skin burn and accidental explosions, the most remarkable of this remote control for firework ignition is that there is no need to connect firework to any power supply.

We have the following materials.

1×1 channel 9V direct power output receiver（S1X-DC09）

1×one button transmitter (C-1)

1×electric firework

1×9V battery

Connect wire of electric firework to positive and negative terminals on receiver. And connect 9V battery to receiver via connector.

Press button, ignite electirc firework.