6 channel – Remote Control Everything

10amp AC Remote Switch Controls AC Motors’ Rotation

This 6 channel AC triggered remote control is easy to install and use. It is capable of controlling lights, motors, fans, electrically operated doors/locks/windows/blinds/cars or other appliances with AC110~240V or DC0~28V. As for 6 channels, it can control six devices simultaneously at most. With 500m working distance, you can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance. The wireless RF signal can pass through walls, floors, doors or other obstacles. Universal input: support voltage of AC110V (100V~120V), widely used in US, Canada… and voltage of AC220V (200V~240V), used in UK, France…

We will try to show you how to control positive and reversal rotation of two AC motors with 6 channel AC remote module. We will use four of all relays. Let’s see the following material.

1×6CH rf receiver

1×6-button transmitter

2×AC motor

Some lines

Power supply 220V

Here is the wiring diagram. This is the AC motor’s wiring. Motors should be connected to common terminals of B. We add neutral wires to connect both motors since they are ac motors. Live wires are connected to normally open terminals of C.

We suggest setting “Momentary Mode” for motor control. Only connect Jumper-1. It is an easy operation.

Press and hold button 1, motor 1 rotates in positive direction. Release the button, motor stops.

Press and hold button 3, motor 1 rotates in reversal direction. Release the button, motor stops.

Press and hold button 2, motor 2 rotates in positive direction. Release the button, motor stops.

Press and hold button 4, motor 2 rotates in positive direction. Release the button, motor stops.

Operational Video:

12V Remote Control for 2 AC Motors

Electric motors are everywhere, even computers have electric motors to power its cooling fans and hard disks. But, today we will talk about remote controlling AC motor by DC remote controller. Then this 6CH RF wireless remote control switch operates in toggle, momentary, latched and toggle + momentary control mode (set the mode as you like freely). You can use it to complete six operations at the same time. For example, turn the light on, open the door or control other dc/ac electrical devices in the meantime. It is applied for light remote control, motor remote control, garage door remote control, gate remote control, etc. Its transmitting distance can reach 500m (1500ft). Three voltages include dc9v, dc12v and dc24v.

We will try to show you how to control positive and reversal rotation of two AC motors with this remote module. We will use four of all relays. Let’s see the following material.

1×6CH rf receiver

1×6-button transmitter

2×AC motor

Some lines

Power supply