rf remote control – Page 7 – Remote Control Everything

Easy to Light Fireworks by RF Remote Control

To avoid accidents like skin burn and accidental explosions, it’s better to use remote control to light the fireworks. Here we talk how to apply our simple 1-channel rf momentary remote control kit to fireworks ignition.

The first picture shows the materials you should prepare.

1 x rf momentary remote control kit (S1M-DC12 & C-1)

1 x fireworks

1 x 12v power supply

some lines

Now wire the ignition head of fireworks to the rf receiver according to the wiring diagram.

As you see in the picture, press and hold the remote button to light the fireworks. So easy to do it.

Warning: Fireworks are dangerous, so be careful when handling ignition. Clear the area before launching the fireworks, check to make sure your battery is disconnected while wiring up the fireworks.

Operation video please visit: Remote Control Firework Ignition

Online shop: www.carymart.com/

Remote Control Shutter of Your Camera

Have you ever thought about remote controlling the shutter of your camera, so you can take pictures without needing to physically touch the camera? Besides, the remote should be radio frequency (RF), not infrared, because infrared remote requires clear line-of-sight and will not work in the situation like kite photography.

Here today we will talk how to apply our rf remote control & receiver to remote-controlled photo taking.

Look at the picture below, we choose a 12V 4-channel receiver (model S4C-DC12) and a 3-button remote control (model CWB-3). Remote distance is about 50 meters.

First step: Plug the shutter release cable to the remote control terminal on camera.

Second step: Wire the shutter release cable to the receiver according to the wiring program.

Third step: Press button A to Focus. Press button B to take photograph. (Button C is for Bulb mode, but we didn’t use it here.)

Online shop: www.carymart.com/

How to control 6 led lamps by one remote?

One customer said he was looking for a rf wireless remote that he could use to create a simple on off switch to 6 led lamps at different places around his living room. Each lamp had its own power supply 12V. The remote would be able to control 6 leds seperately.

Then he found a rf remote control kit model of 0020431 (6S1UB-DC12 & CV-6) from our store carymart.com. It includes one 6-button remote and six 1-channel receivers.

Each LED lamp can be wired to each receiver. Each button of remotes switches each lamp on and off.

Online shop: http://www.carymart.com/