Electric motors are everywhere, even computers have electric motors to power its cooling fans and hard disks. But, today we will talk about remote controlling AC motor by DC remote controller. Then this 6CH RF wireless remote control switch operates in toggle, momentary, latched and toggle + momentary control mode (set the mode as you like freely). You can use it to complete six operations at the same time. For example, turn the light on, open the door or control other dc/ac electrical devices in the meantime. It is applied for light remote control, motor remote control, garage door remote control, gate remote control, etc. Its transmitting distance can reach 500m (1500ft). Three voltages include dc9v, dc12v and dc24v.
We will try to show you how to control positive and reversal rotation of two AC motors with this remote module. We will use four of all relays. Let’s see the following material.
1×6CH rf receiver
1×6-button transmitter
2×AC motor
Some lines
Power supply
Here is the wiring diagram. This is the AC motor’s wiring. Motors should be connected to common terminals of B. We add neutral wires to connect both motors since they are ac motors. Live wires are connected to normally open terminals of C.
We suggest setting “Momentary Mode” for motor control. Only connect Jumper-1. It is an easy operation.
Press and hold button 1, motor 1 rotates in positive direction. Release the button, motor stops.
Press and hold button 3, motor 1 rotates in reversal direction. Release the button, motor stops.
Press and hold button 2, motor 2 rotates in positive direction. Release the button, motor stops.
Press and hold button 4, motor 2 rotates in positive direction. Release the button, motor stops.
Operational Video:
Follow