beep – Remote Control Everything

Long Range Vibrating and Beep Alerts Kit

Vibrating alerts are primarily used when a user (deaf people or aged people) cannot hear the ring tone (a noisy environment or through hearing difficulty) or want s a more discreet notification. Vibrating alerts is used in mobile phones. If you put vibrator to a hard surface, it will be louder than a ringtone. In fact, we integrate vibration and beep function into one item. So we’d like recommend this kind of 1000m rf tri-mode wireless vibrator kit (12Z-06 & CB-12). It includes 12 vibrators and a 12-button transmitter. This vibrator kit’s transmission distance is about 1000m. There are four working modes in them. They are vibration, beep, vibration and beep.

Here is the usage of vibrator kit.

The first step is learning.

1) Press and hold the learning button of the receiver(vibrator) for about 5 seconds, then release the button when LED light is on, the receiver (vibrator)is in the status of Learning.
2) Press button of remote control within 10 seconds, if LED light flashes twice then off, it means Learning is successful.
If LED light is off after 10 seconds, it means Learning is failed and the receiver quits the status of Learning.
3) The receiver (vibrator) can learn several remote controls of different codes.

So the receiver (vibrator) will learn transmitter’s signal from its button 1 to button 12.

The next step is controlling.

Vibration mode: Press the button of transmitter, the receiver vibrates for 5 seconds.

Beep mode: Press the button of transmitter, the receiver beeps for 5 seconds.

Vibration & Beep mode: Press the button of transmitter, the receiver vibrates and beeps together for 5 seconds.

Changing modes: As long as press the button of receiver, you can switch those three working modes optionally. Such as press the button of receiver, switch to beep mode from vibration mode; press the button of transmitter again, switch to vibration & beep mode; press the button of transmitter again, switch to vibration mode.

Each button of transmitter can control one receiver.

1000m Range Multi-mode Beeper& Vibrator Remote Control Kit

Beeper is an audio signaling device, which is used in alarm devices, timers or other devices typically. A customer is interested in our remote-controlled beeper& remote transmitter kit. He needs 12 beepers and 12 transmitters with 1000m working distance but He wants to be able to register one transmitter to two beepers and two transmitters to one receiver. It is possible to pair up one transmitter to two beepers or two transmitters to one receiver.

This beeper kit has vibration mode and vibration mode &beeper mode other than beeper mode. The receiver works with 1000m-range transmitter. Its working distance can reach 1000m in the open field. You can control the receiver with transmitter (remote control) from any place within a reliable distance, the wireless signal can pass through walls, floors and doors.

To realize one transmitter controlling two beepers or two transmitters controlling one receiver, first of all, you should use receiver to learn codes from transmitter.

One transmitter controlling two beepers:

Press and hold the learning button of the first receiver for about 5 seconds, then release the button when LED light is on, the receiver is in the status of Learning.

Press button of remote control within 10 seconds, if LED light flashes twice then off, it means Learning is successful.

If LED light is off after 10 seconds, it means Learning is failed and the receiver quits the status of Learning.

Follow steps above to make the second receiver learn code from the transmitter.

Operation 1:

Vibration mode: Press the button of transmitter, two receivers vibrate for 5 seconds.

Beep mode: Press the button of transmitter, two receivers beep for 5 seconds.

Vibration & Beep mode: Press the button of transmitter, two receivers vibrate and beep together for 5 seconds.

Two transmitter controlling one receiver:

Press and hold the learning button of the receiver for about 5 seconds, then release the button when LED light is on, the receiver is in the status of Learning.

Press button of the first transmitter within 10 seconds, if LED light flashes twice then off, it means Learning is successful.

If LED light is off after 10 seconds, it means Learning is failed and the receiver quits the status of Learning.

Follow steps above to make the receiver learn the second transmitter.

The receiver can learn several remote controls of different codes.

Operation 2:

Vibration mode: Press the button of transmitter 1, the receiver vibrates for 5 seconds; Press the button of transmitter 2 the receiver vibrates for 5 seconds.

Beep mode: Press the button of transmitter 1, the receiver beeps for 5 seconds; Press the button of transmitter 2, the receiver beeps for 5 seconds.

Vibration & Beep mode: Press the button of transmitter 1, the receiver vibrates and beeps together for 5 seconds; Press the button of transmitter 2, the receiver vibrates and beeps together for 5 seconds.

Changing modes: As long as press the button of receiver, you can switch those three working modes optionally. Such as press the button of receiver, switch to beep mode from vibration mode; press the button of transmitter again, switch to vibration & beep mode; press the button of transmitter again, switch to vibration mode.

How Does Integrated Vibrator and Pager Work

A vibrator is a mechanical device to generate vibrations. So as components of larger product, vibrators will be widely installed in mobile phone, pagers, doorbells or other devices which need the vibrating alert. In addition, we notice another gadget-buzzer/ beeper, which is an audio signaling device. Buzzers / beepers are used in alarm device, timer and other device which needs make sound to alert. Now, we integrate two kinds of equipment with RF technology to make device- Integrated gadget with vibrator and pager (Z-06+C-1). There are three working modes for this gadget. They are vibration, beep and vibration + beep modes. It can be used in calling, animals training, alert device, reminder…

It pairs with a transmitter. We design learning code function for them. You should let receiver learn code from transmitter.

Learning code:

1) Press and hold the learning button of the receiver for about 5 seconds, then release the button when LED light is on, the receiver is in the status of Learning.

2) Press button of remote control within 10 seconds, if LED light flashes twice then off, it means Learning is successful. If LED light is off after 10 seconds, it means Learning is failed and the receiver quits the status of Learning.

3) The receiver can learn several remote controls of different codes.

Delete code:

If you don’t want the receiver to work with the remote control, you can delete all stored codes:

Delete all stored codes: Press and hold the button of the receiver for about 5 seconds until LED light turns on and go on holding till LED light turns off, then release the button, all stored codes have been deleted successfully. At this time, the transmitter cannot control the receiver.

Note:

If you want to delete all stored codes, you should first switch off the receiver and switch on again, then you can go on deleting codes.

Remote Controlling:

Vibration mode: Press the button of transmitter, the receiver vibrates for 5 seconds.

Beep mode: Press the button of transmitter, the receiver beeps for 5 seconds.

Vibration & Beep mode: Press the button of transmitter, the receiver vibrates and beeps together for 5 seconds.

Video: