Tri-mode Vibration &Beep Kit

How Does Integrated Vibrator and Pager Work

A vibrator is a mechanical device to generate vibrations. So as components of larger product, vibrators will be widely installed in mobile phone, pagers, doorbells or other devices which need the vibrating alert. In addition, we notice another gadget-buzzer/ beeper, which is an audio signaling device. Buzzers / beepers are used in alarm device, timer and other device which needs make sound to alert. Now, we integrate two kinds of equipment with RF technology to make device- Integrated gadget with vibrator and pager (Z-06+C-1). There are three working modes for this gadget. They are vibration, beep and vibration + beep modes. It can be used in calling, animals training, alert device, reminder…

11_06

It pairs with a transmitter. We design learning code function for them. You should let receiver learn code from transmitter.

Learning code:

1) Press and hold the learning button of the receiver for about 5 seconds, then release the button when LED light is on, the receiver is in the status of Learning.

2) Press button of remote control within 10 seconds, if LED light flashes twice then off, it means Learning is successful. If LED light is off after 10 seconds, it means Learning is failed and the receiver quits the status of Learning.

3) The receiver can learn several remote controls of different codes.

Delete code:

If you don’t want the receiver to work with the remote control, you can delete all stored codes:

Delete all stored codes: Press and hold the button of the receiver for about 5 seconds until LED light turns on and go on holding till LED light turns off, then release the button, all stored codes have been deleted successfully. At this time, the transmitter cannot control the receiver.

Note:

If you want to delete all stored codes, you should first switch off the receiver and switch on again, then you can go on deleting codes.

Remote Controlling:

Vibration mode: Press the button of transmitter, the receiver vibrates for 5 seconds.

Beep mode: Press the button of transmitter, the receiver beeps for 5 seconds.

Vibration & Beep mode: Press the button of transmitter, the receiver vibrates and beeps together for 5 seconds.

Changing modes: As long as press the button of receiver, you can switch those three working modes optionally. Such as press the button of receiver, switch to beep mode from vibration mode; press the button of transmitter again, switch to vibration & beep mode; press the button of transmitter again, switch to vibration mode.

Video: