AC 220V – Remote Control Everything

Question from customer:

“I’d like to order a 220v electric hoist to raise and down a bridge boat with a remote control. The ascent and descent should be done when someone is still pressing the remote control button, as there is no stop. What would you like me the most suitable product? Thank you in advance.”

Answer:

We recommend the ac 100V~240V momentary motor controlling model (S1FM-AC220 & CV-2-2). It is specially designed for motor controlling because two relays are inserted inside. One relay is used for motor rotating towards “UP”. Another relay is used for motor rotating towards “DOWN”. There are “UP”, “COM” and “DOWN” contacts from output terminal. This kit can controls motor of rolling blinds, doors, projection screens, awnings, pumps, conveyors other appliances and mechanicals. The transmitting distance is usually about 500m in the open air.

Wiring:

Connect live wire to terminal “L” and neutral wire to terminal “N”. Then connect AC electric hoist motor to terminals “UP”, “COM” and ‘DOWN”. You can exchange “UP” and “DOWN” wires of motor to change rotating direction of motor.

Operation:

There are three buttons on the receiver for motor up and down. But button ■ on the receiver is useless.

Press and hold button ▲ on remote or receiver: Terminals UP and COMMON directly output AC110V / AC220V; electric hoist motor rotates continuously in positive direction.

Release button ▲ on remote or receiver: Stop the electric hoist motor.

Press and hold button ▼ on remote or receiver: Terminals DOWN and COMMON directly output AC110V / AC220V; electric hoist motor rotates continuously in reversal direction.

Release button ▼ on remote or receiver: Stop the electric hoist motor.

Overview:

I wish to run my outer sliding gate and my inner sliding gate, I would use a single remote control to operate both gates.

Solution:

You can use a transmitter with two buttons (C-2) to control two 1 channel AC receivers (S1U-AC220), one button controls one receiver. Convenient compact design of this RF wireless remote control switch system – includes 1 transmitter & 2 receivers. It is very distinguished and the high quality. This switch can be applied to your lights, air conditioners, televisions, fans, doors, power locks, electric windows, electric curtains, etc. … all DC 0-28V or AC110 ~ 240V electrical appliances! The remote control is really fashionable and practical.

The wiring is very simple.

Wire gate motor to normally open &closed contact and “N” terminal. Wire “C” terminal and “L” terminal. Add wire to “N” terminal. Your gate motor can share power supply with receiver by this way.

Setting control mode Momentary: Only connect Jumper-1.

Control mode Momentary: Press and hold -> On; Release -> Off.

Press and hold button 1: Turn on the relay, open the outer sliding gate.

Release button 1: Turn off the relay, close the outer sliding gate.

Press and hold button 2: Turn on the relay, open the inner sliding gate.

Release button 2: Turn off the relay, close the inner sliding gate.

Tag: AC 220V

Boat Bridge is Controlled by Remote Controlled Electric Hoist

2 Channel AC 220V Remote Controller Controls Outer and Inner Sliding Gates