time delay function – Remote Control Everything

120V Winch Motor is Controlled Remotely by Inversion Motor Controller with Time Delay Function

Question from customer:

We are looking for a 120vac powered remote control for winch. We need 1 motor control 120vac with ability to stop when limit switch reached. Also like delay for start direction of ac motor.

Answer:

Forward &Reverse Motor controller is 110V~220V power actuated, which also enjoys time delay function and limit switch. It focuses on capability of motor forward-reverse-stop. Wireless signal pass through walls, floors, doors and other obstacles if you remote control your winch motor within a reliable distance from any places. With time delay function, the working time can be adjusted from 10 to 60 seconds. What’s more, the limit switch can prolong or shorten delay time through its clockwise or anti-clockwise rotation. It really meets your need.

Wiring and operation will be explained in more detail from following procedure and picture.

Wiring procedure:

Connect the live wire to the “L”, and the zero wire to the “N”. Connect AC motor to the “OUT” and the zero wire. You can exchange output wires of motor to change the rotating direction of motor.

Operation:

Press button ▲: Light 1 shines, motor rotates in the positive direction, and it will stop after a certain delay time.

Press button ▼: Light 2 shines, motor rotates in the reversal direction, and it will stop after a certain delay time.

The delay time of positive / reverse rotation can be adjusted from 10 to 60 seconds. Turn R1/R2 clockwise, prolong the delay time. Turn R1/R2 anti-clockwise, shorten the delay time. When you press button ▲ or button ▼, the motor starts to rotate; It will stop after the delay time is expired.

When the rotation is overdone, if switch S1 or S2 is activated, the motor will stop automatically.

After press button ▲, you must press button ■ to stop the motor firstly, and then press button ▼.

If you pull out the Jumper of the receiver, you can press directly button ▼ after press button ▲.

Infrared Movement Sensors for Lighting Control

Motion sensor, we also can say occupancy sensor, which is used in corridor, staircase or other dim places for electric lighting control. If there is motion being detected, it is assumed that the place is not empty, and thus needs to be lit. When there is no motion, the light will go out automatically after preset delay time. Light turning off to some extent can save substantial amounts of energy. We will try to control 2 led lamps with 2 infrared movement detectors (W-01) and AC activated receiver with time delay function (S2DA-AC220). The working distance of wireless signal is 100m (open field). The detection distance of motion detector is 10m. The RF receiver is an adjustable time delay receiver. This delay time is user-selectable. Delay time can be adjusted as you like within 0 second~99 hours.

Note: Don’t install 2 infrared motion detectors within a small space because of generation of interference.

Let’s see the following material. We have 2 motion detectors, receiver, 2 AC lamps, AC 220 power supply.

The wiring and operation pictures are as follows:

Wire 2 lamps to the rf receiver.

Set delay time: 5 seconds for each relay and switch on the power.

Hand moves around the first motion detector, lamp 1 turns on automatically.

When there is no motion, lamp 1 will be off by itself after 5 seconds.

Hand moves around the second motion detector, lamp 2 turns on automatically.

When there is no motion, lamp 2 will be off by itself after 5 seconds.

Operation Video:

Lamps Control Automation by Motion Detectors

Motion sensors are often used in indoor spaces to control electric lighting. If no motion is detected, it is assumed that the space is empty and no people activities, and thus does not need to be lit. We will try to make motion detector 2 led lamps with 2 infrared movement detector (W-01) and RF receiver with time delay function (S2DA-DC12). The working distance of motion detector is 100m (open field). The detection distance is 10m. The RF receiver is an adjustable time delay receiver. This delay time is user-selectable. Delay time can be adjusted as you like within 0 second~99 hours. Then lamps turning off automatically after delay time in such circumstances can save substantial amounts of energy.

Note: Don’t install 2 infrared motion detectors within a small space because of generation of interference.

Let’s see the following material. We have 2 motion detectors, receiver, 2 led lamps, dc12V power supply.

The wiring and operation pictures are as follows:

Wire 2 lamps to the rf receiver.

Set delay time: 5 seconds for each relay and switch on the power.

Hand moves around the first motion detector, blue lamp turns on automatically.

When there is no motion, blue lamp will be off by itself after 5 seconds.

Hand moves around the second motion detector, red lamp turns on automatically.

When there is no motion, red lamp will be off by itself after 5 seconds.

Operation Video:

Time Delay AC Activated Remote Control for Lighting Control

We will try to make motion detector AC lamp with infrared motion sensor (W-01) and AC activated rf receiver with time delay function (S1DA-AC220). The working distance of motion detector is 100m (open field). The detection distance is 10m. The rf receiver is an adjustable time delay receiver. This delay time is often user-selectable which can be adjusted within 0 second~99 hours.

Operation Video: