A new product has added in our online shop. It is 2-channel high power dc remote control kit (S2PX-DC12/24+C-2) with direct dc 12V power output (there is no need to supply power to controlled devices). Maximum current of this remote is 30amp. As for its high power, it includes 12V/24VDC power and excludes 9VDC power. It is applied to controlling lights, motors, fans, electrically operated doors, locks, windows, rolling blinds, cars or other home appliances and industrial devices.
You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.
There are 4 working modes in it. They are Toggle, Momentary, Latched, Momentary + Toggle.
Setting different control modes as you want.
•1) Setting control mode Toggle: Only connect Jumper-2.
Press button 1: Turn on the relay 1
Press button 1 again: Turn off the relay 1
Press button 2: Turn on the relay 2
Press button 2 again: Turn off the relay 2
•2) Setting control mode Momentary: Only connect Jumper-1.
Press and hold button 1: Turn on the relay 1
Release button 1: Turn off the relay 1
Press and hold button 2: Turn on the relay 2
Release button 2: Turn off the relay 2
•3) Setting control mode Latched: Do not connect Jumper-1 and Jumper-2.
Press button 1: Turn on the relay 1
Turn off the relay 2
Press button 2: Turn on the relay 2
Turn off the relay 1
•4) Setting control mode Momentary + Toggle: Connect Jumper-1 and Jumper-2.
Control mode Momentary (Channel 1):
Press and hold button 1: Turn on the relay 1
Release button 1: Turn off the relay 1
Control mode Toggle (Channel 2):
Press button 2: Turn on the relay 2
Press button 2 again: Turn off the relay 2
We have made a show. How to remote control 2 LED lamps by this remote?
Let’s see the following procedure.
1×2-channel high power receiver
1×2-button transmitter
2×LED lamp
1×12V power adaptor
Line
According to the wiring diagram, we only need to wire 2 lamps to the “OUTPUT1&2” terminals of receiver and supply power to” +&-” terminals of receiver.
Controlling light, we usually use “Toggle” mode so we only connect Jumper-2. We will turn on power when we finished connection.
Press button 1, turn on red light.
Press button 1 again, turn off red light.
Press button 2, turn on blue light.
Press button 2 again, turn off blue light.
Video: