How to Control 4 Courtyard Lamps

Question from customer:

I am looking for remote control 220v for courtyard lamp use. I need 1 transmitter and 4 canals receivers 220V. The kit will be outdoor, out of house, in the courtyard. I also want the distance for telecommand must be +/- 150 m. Do you have any style of remotes ?

Garden Lamp


We recommend 2000M long range 4CH AC power output remote control kit to you. 4-button transmitter is compatible with 4 channel receiver. One button is to its correspondent channel. You can connect 4 courtyard lamps to receiver. This remote is 220VAC power output so you have not to supply any power to controlled courtyard lamps. With external extended antenna, the transmitting distance exceeds 150m to reach 2000m out of house. So you can rest assured that this remote can meet the telecommand distance.


Operation is very simple.

You may have this following material.

1×4-channel long range receiver

1×4-button long range transmitter

4×AC Lamp(suppose to be courtyard lamp)

220VAC Power supply

S4X-AC-ANT2&CB-4L material

Here is the wiring diagram. You can connect 4 AC lamps to “A&B” output terminals of receiver. Then supply power to receiver.


S4X-AC-ANT2&CB-4L wiring

Setting “Toggle Mode” Only connect Jumper-2 with a little jumper.

Press button A, turn on lamp 1; Press button A again, turn off lamp 1.

S4X-AC-ANT2&CB-4L button A on&off

Press button B, turn on lamp 2; Press button B again, turn off lamp 2.

S4X-AC-ANT2&CB-4Lbutton B on&off

Press button C, turn on lamp 3; Press button C again, turn off lamp 3.

S4X-AC-ANT2&CB-4L button C on&off

Press button D, turn on lamp 4; Press button D again, turn off lamp 4.

S4X-AC-ANT2&CB-4L button D on&off


Leave a Reply