October 2013 – Page 3 – Remote Control Everything

WIFI Remote Control Home Theatre Slide Panels

Home theatre refers to home entertainment systems that seek to reproduce a movie theater experience and mood, with the help of video and audio equipment in or outside a private home. Keep from mositure or dust, we usually use slide panels to protect them, you can use our utility Smartphone WIFI Controller to open or close slide panels. WLAN WIFI is extensively used nowadays, so we combine remote controller with WIFI network to make useful sort of product. If you use this WIFI controller, only to use your cell phone as a transmitter, you can control your device within a reliable distance with WLAN.

It is applied in smart home, instruments, equipment control and modern agriculture field. WIFI remote controller controls many kinds of lights, motors, fans, electric doors/windows, aircraft, cars components, toys, rolling blinds, water pumps, winches or other electric devices with voltage AC110~240V or DC0~28V by its normally open and closed terminals.

This WIFI controller supports both 2.1 ~ 4.0 version Android software system and 4.6 ~ 6.1 version iOS software system. And we’d like introduce how to control DC motor under the iOS system. This controller works on the jailbroken iPhone, iPad, iPod Touch. Let’s see the procedure.

Here is the wiring diagram and picture. Motor is connected to common terminal ”B”. And normally open terminal“C” is connected to positive wire. Normally closed terminal “A” is connected to negative wire.

After finishing wiring, we switch on power. The LEDs of “Power”, “Ready” and “Link” are on one by one. We begin to operate.

After wireless network connection, press the icon of WIFI Controller software to turn on it.

There are 3 modes in common use. They are toggle, momentary and latched. But we usually use momentary for motor controlling.

Press and hold button 1, it is the motor’s positive rotation. Slide panels open. Release button 1, it is motor’s stop.

Press and hold button 2, it is the motor’s reverse rotation. Slide panels closed. Release button 2, it is motor’s stop.

Video:

Remote Control 4 Linear Actuators Up and Down Simultaneously

Question from customer:

I have this car project. I’m using 4 linear actuators to lower and raise a front spoiler on the bumper. I need a controller that can move all 4 simultaneously.

Answer:

Our suggestion is that you can use our one channel high power motor controller (S1PF-DC12+CV-4-2).

With high power of 30A, so that you can control DC motors of rolling blinds, doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals with voltage DC12V / 24V. You can rotate the motor in positive or reversal direction with the transmitter (remote control) from any place within a reliable distance; the wireless signal can pass through walls, floors and doors. You want to remote move 4 linear actuators simultaneously, you can wire them in parallel.

Operation:

•Connect power supply DC12V / 24V to terminal “INPUT”; connect linear actuators to terminal “OUTPUT”.

•Setting control mode Latched: Do not connect Jumper-1 (CN1) or Jumper-2 (CN2)

Press button ▲: 4 linear actuators rotate in up direction at same time.

Press button ■: linear actuators stop

Press button ▼: 4 linear actuators rotate in down direction simultaneously.

Press button ■: linear actuators stop

•Setting control mode Momentary: Only connect Jumper-1 (CN1)

Press and hold button ▲: 4 linear actuators rotate in up direction at same time.

Release button: linear actuators stop

Press and hold button ▼: 4 linear actuators rotate in down direction simultaneously.

Release button: linear actuators stop

Momentary Remote Switch for Car Siren and LED Lights

Question from customer:

If I wire a 12v device into the receiver, I won’t need to connect the device to its own power source. It gets power through this receiver. Actually,I am ready to wire a 12v car siren into one channel and a set of 12v LEDs into the other, and wire the 12v DC in to my cars battery. I can honk the siren and flash the lights from the remote?

Answer:

Our suggestion is that you can choose our 2 channel momentary 12VDC power output remote controller (S2XM-DC12 & C-2).

This is 12VDC direct power output, that is to say, you don’t have to supply your siren and led lamps to its own power because they can get through this receiver if you supply power to receiver. In addition, there are two channels for your devices you want to control. It is momentary controlling mode, which means that you press and hold button, the siren blares or led lamps flash constantly, but you release button, siren stops blaring or led lamps stop flashing. Two buttons on the transmitter are controlled siren and led lamps respectively. They won’t be interfered each other.

You can follow the wiring diagram and picture to wire your siren and led lamps. Car horn is connected to terminals of relay 1 and led lamps are connected to terminals of relay 1 in parallel. Car battery is supplied to receiver. Thus, siren and led lamps can get power through receiver.

You can honk the siren by pressing button 1 on the transmitter and flash led lamps by pressing button 2 on the transmitter. One transmitter can control two or more devices at ease.

How to Remote Control Spot light

One of our customers is a lighting designer, who is in charge of stage lighting for a show. He wants to remote control 4 stage spot lights with a remote. And each button can control each light on and off respectively.

We recommend him 4 channel remote switch kit (S4T-DC12+C-4). This is a toggle mode remote controller. It is often used to light controlling. We press the button of remote, turn on the light; press the button again, turn off the light. He can switch on and off any of lights as he wants. Normally open and close terminals connection method is capable of controlling appliances with AC110~240V or DC0~28V.

We can give him a demonstration of controlling lights.

We need the following material. They are remote control kit, LED lights, power adaptors and some lines.

This is the wiring diagram and wiring picture.

Press button 1, turn on light 1; press button 1 again, turn off light 1.

Press button 2, turn on light 2; press button 2 again, turn off light 2.

Press button 3, turn on light 3; press button 3 again, turn off light 3.

Press button 4, turn on light 4; press button 4 again, turn off light4.

Switching on and off spot lights by one transmitter is very convenient to him. He can stand anywhere to control spot lights within a reliable distance (100m). The wireless RF signal can pass through walls, floors and doors.

Video:

Remote Control Crystal Glass Panel Doorbell Switch

Question from customer:

I want to use your remote control system control an electromechanical bell. Do you have any kind of remotes suitable?

Answer：

We recommend 1 channel momentary remote kit and doorbell touch switch to you make a wireless doorbell. This 1 channel dc rf remote control momentary switch is with direct power output function. The input and output power are the same. It is easier for wiring and operation and widely applied to control lights, motors, fans, electrically operated doors / locks / windows or other electrical devices. Doorbell touch switch is quick and easy to install, as normal light switch.

How to make them work? Let’s read the following procedure.

The first step, you may solder two terminals of 1-button transmitter backside to doorbell switch “L1&L” terminals backside.

And next, your doorbell should be connected to the receiver like the diagram. Connect doorbell to “A&B” terminal. Then switch on power.

Finally, press the button on switch outdoor, is equivalent to press button of transmitter. The transmitter will send RF signal to receiver. Then, the bell will ring. So it makes a wireless doorbell.