October 2013 – Page 4 – Remote Control Everything

How to Control 4 Courtyard Lamps

Question from customer:

I am looking for remote control 220v for courtyard lamp use. I need 1 transmitter and 4 canals receivers 220V. The kit will be outdoor, out of house, in the courtyard. I also want the distance for telecommand must be +/- 150 m. Do you have any style of remotes ?

Answer：

We recommend 2000M long range 4CH AC power output remote control kit to you. 4-button transmitter is compatible with 4 channel receiver. One button is to its correspondent channel. You can connect 4 courtyard lamps to receiver. This remote is 220VAC power output so you have not to supply any power to controlled courtyard lamps. With external extended antenna, the transmitting distance exceeds 150m to reach 2000m out of house. So you can rest assured that this remote can meet the telecommand distance.

Operation is very simple.

You may have this following material.

1×4-channel long range receiver

1×4-button long range transmitter

4×AC Lamp(suppose to be courtyard lamp)

220VAC Power supply

Here is the wiring diagram. You can connect 4 AC lamps to “A&B” output terminals of receiver. Then supply power to receiver.

Setting “Toggle Mode” Only connect Jumper-2 with a little jumper.

Press button A, turn on lamp 1; Press button A again, turn off lamp 1.

Press button B, turn on lamp 2; Press button B again, turn off lamp 2.

Press button C, turn on lamp 3; Press button C again, turn off lamp 3.

Press button D, turn on lamp 4; Press button D again, turn off lamp 4.

Video:

Heavy Duty DC Remote for 2 LED Lamps

A new product has added in our online shop. It is 2-channel high power dc remote control kit (S2PX-DC12/24+C-2) with direct dc 12V power output (there is no need to supply power to controlled devices). Maximum current of this remote is 30amp. As for its high power, it includes 12V/24VDC power and excludes 9VDC power. It is applied to controlling lights, motors, fans, electrically operated doors, locks, windows, rolling blinds, cars or other home appliances and industrial devices.

You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.

There are 4 working modes in it. They are Toggle, Momentary, Latched, Momentary + Toggle.

Setting different control modes as you want.

•1) Setting control mode Toggle: Only connect Jumper-2.

Press button 1: Turn on the relay 1

Press button 1 again: Turn off the relay 1

Press button 2: Turn on the relay 2

Press button 2 again: Turn off the relay 2

•2) Setting control mode Momentary: Only connect Jumper-1.

Press and hold button 1: Turn on the relay 1

Release button 1: Turn off the relay 1

Press and hold button 2: Turn on the relay 2

Release button 2: Turn off the relay 2

•3) Setting control mode Latched: Do not connect Jumper-1 and Jumper-2.

Press button 1: Turn on the relay 1

Turn off the relay 2

Press button 2: Turn on the relay 2

Turn off the relay 1

•4) Setting control mode Momentary + Toggle: Connect Jumper-1 and Jumper-2.

Control mode Momentary (Channel 1):

Press and hold button 1: Turn on the relay 1

Release button 1: Turn off the relay 1

Control mode Toggle (Channel 2):

Press button 2: Turn on the relay 2

Press button 2 again: Turn off the relay 2

We have made a show. How to remote control 2 LED lamps by this remote?

Let’s see the following procedure.

1×2-channel high power receiver

1×2-button transmitter

2×LED lamp

1×12V power adaptor

Line

According to the wiring diagram, we only need to wire 2 lamps to the “OUTPUT1&2” terminals of receiver and supply power to” +&-” terminals of receiver.

Controlling light, we usually use “Toggle” mode so we only connect Jumper-2. We will turn on power when we finished connection.

Press button 1, turn on red light.

Press button 1 again, turn off red light.

Press button 2, turn on blue light.

Press button 2 again, turn off blue light.

Video:

One Transmitter Remote Control 6 Water Scooters

Question from customer:

I would like to find a solution to control 6 water scooters (12 V). The idea is that from the beach, I am able to shut down the switch of a user that is getting wild or getting to close to danger. So the longest the control distance is much better.

Answer:

We recommend six 12VDC direct power output receivers (S1XB-DC12-ANT2) with the long distance remote (CB-6). Input power and output power of receiver are same as dc 12v. So it is easy for wiring. The receiver can use the water scooters’s battery to operate and controlled water scooters also can get power through receiver. The usage is also very simple. There are 3 working modes setting in the remote control. They are toggle, momentary and latched. But as for you, you have to use toggle mode. Press button, turn on device; Press button again, turn off device.

Working distance of remote and receiver set is 2000m (6000ft) in open field if we add external extended antenna in it.

Controlling 6 water scooters, you need 6 receivers. Wire each water scooter’s motor to each receiver as the following picture shown.

When any of water scooters is getting wild or getting to close to danger, you can press any button to stop any of them to prevent from accidents. What’s more, it is the long range remote control which can help you control water scooters long distance.