12vdc – Remote Control Everything

2000m Tri-mode Motor Remote Controller for Skylight

Skylights are widely used in designing for residential, public, and commercial buildings. Increased day lighting can result in less electric lighting use and saving energy, lowering costs and reducing environmental pollution. Skylight can offer you beautiful view from roof. At night, you can also watch stars from skylight when you stay in bed. Maybe it is not convenient to you to open and close skylight manually. So you may want to remote control it.

Tri-mode motor remote controller with 3-button transmitter can be used in dc motor of skylight application. Applications also include light remote control, electric gate remote control, electric window / blind remote control, etc. It is added an external extended antenna, which makes its transmitting distance reach 2000m.

There are three working modes in it. You will see the example controlling procedure from following information.

Material preparation:

Wiring is very simple.

Motor is wired to B terminals of receiver. And supply power for receiver. Motor can get power from receiver.

Setting control mode Toggle: Only connect Jumper-2.

Press button A, motor rotates in the positive direction; Press button A again, motor stops

Press button B, motor rotates in the reversal direction; Press button B again, motor stops

Setting control mode Momentary: Only connect Jumper-1.

Press and hold button A, motor rotates in the positive direction.

Release button A, motor stops

Press and hold button B, motor rotates in the reversal direction.

Release button B, motor stops

Setting control mode Latched: Do not connect Jumper-1 and Jumper-2.

Press button A, motor rotates in the positive direction.

Press button B, motor rotates in the reversal direction.

Press button C, motor stops

Video, please click here

Power Direct Ouput Remote Controller for Air Compressor

Question from customer:

I have an air compressor that sits about 100’ away, and want to open an air valve to actuate the blown horns that I have installed in the center of the arena. Do you have a setup that I can purchase or any suggestion?

Answer：

We recommend the model of DC voltage output remote control kit (S1X-DC12&C-2). It is voltage output receiver so you can connect a 12V battery to this receiver and connect your air valve to the output of this receiver, the air compressor can get power through receiver. Then you can use the remote to control them.

The remote control operates in toggle, momentary and latched mode (set the mode as you like freely). We suggest setting latched mode because the receiver pairs with 2-button transmitter. One button controls “On”, another button controls “Off”.

Wire air compressor to the receiver as the following picture shown. This receiver is designed with voltage direct output configuration. You can wire your air compressor to terminals A&B of the receiver and then supply 12V power to receiver.

Operation:

Setting control mode Latched: Disconnect Jumper-1 and Jumper-2.

Control mode Latched: Press -> On, other relays Off; Press another button -> Off.

Press button 1: open the air valve, turn on the air compressor.

Press button 2: close the air valve, turn off the air compressor.

One Transmitter Remote Control 6 Water Scooters

Question from customer:

I would like to find a solution to control 6 water scooters (12 V). The idea is that from the beach, I am able to shut down the switch of a user that is getting wild or getting to close to danger. So the longest the control distance is much better.

Answer:

We recommend six 12VDC direct power output receivers (S1XB-DC12-ANT2) with the long distance remote (CB-6). Input power and output power of receiver are same as dc 12v. So it is easy for wiring. The receiver can use the water scooters’s battery to operate and controlled water scooters also can get power through receiver. The usage is also very simple. There are 3 working modes setting in the remote control. They are toggle, momentary and latched. But as for you, you have to use toggle mode. Press button, turn on device; Press button again, turn off device.

Working distance of remote and receiver set is 2000m (6000ft) in open field if we add external extended antenna in it.

Controlling 6 water scooters, you need 6 receivers. Wire each water scooter’s motor to each receiver as the following picture shown.

When any of water scooters is getting wild or getting to close to danger, you can press any button to stop any of them to prevent from accidents. What’s more, it is the long range remote control which can help you control water scooters long distance.

How to Remote Control 4 LED Spotlights of Truck Wirelessly

Question from customer:

I am looking for a wireless control that I can use to 12V 4 LED work spotlights on my small truck. I want to know if it can work. Do you have any recommendation for which wireless remotes may be the best for the task at hand?

Answer to the question:

We think this product may be you want—dc multi-mode distant control (0020382 S4U-DC12& C-4). It includes remote transmitter and receiver. This kind of remote control has 4 working modes. You can choose any working mode according to your requirement. In addition, RF transmitting signal can pass through walls, trees as well as other barriers. The transmitting distance is about 100m (300ft). The maximum working current is 10 A for each relay.

You can wire 4 LED work spotlights to the receiver as the following application circuit shown.

Press button 1 to 4 to control corresponding LED work spotlights on the truck.

Momentary Motor Remote Control Trailer and Winch

Question:

Our company manufactures a series of trailers that use 12vdc hydraulics to tilt and lower the decks. We also often install electric winches on trailers and are looking for a momentary remote to operate the trailer and the 12vdc electric winch.

Answer:

We think momentary dc 2 channel motor remote controller model of 0020481 (S2PF-DC12 & CV-6) is suitable for you. It can be used to control 2 12vdc motors rotating forward and reversal. Maximum working current is up to 30 Amp. This motor remote controller is applicable to control motors of heavy duty electrical devices and equipment, such as your electric trailer and winch.

Wiring diagram is as follow. Connect wires of 12vdc power supply to terminals “+” and “-”; connect wires of trailer motor to terminals “A1” and “A2”; connect wires of winch motor to terminals “B1” and “B2”.

Setting momentary control mode: connect Jumper-1.

Press and hold button 1: trailer motor rotates in positive direction.
Release button 1: trailer motor stops.
Press and hold button 3: trailer motor rotates in reversal direction.
Release button 3: trailer motor stops.

Press and hold button 2: winch motor rotates in positive direction.
Release button 2: winch motor stops.
Press and hold button 4: winch motor rotates in reversal direction.
Release button 4: winch motor stops.

Online shop: www.carymart.com/