Tag: air compressor

Power Direct Ouput Remote Controller for Air Compressor

Question from customer:

I have an air compressor that sits about 100’ away, and want to open an air valve to actuate the blown horns that I have installed in the center of the arena. Do you have a setup that I can purchase or any suggestion?

Answer：

We recommend the model of DC voltage output remote control kit (S1X-DC12&C-2). It is voltage output receiver so you can connect a 12V battery to this receiver and connect your air valve to the output of this receiver, the air compressor can get power through receiver. Then you can use the remote to control them.

remote control

The remote control operates in toggle, momentary and latched mode (set the mode as you like freely). We suggest setting latched mode because the receiver pairs with 2-button transmitter. One button controls “On”, another button controls “Off”.

Wire air compressor to the receiver as the following picture shown. This receiver is designed with voltage direct output configuration. You can wire your air compressor to terminals A&B of the receiver and then supply 12V power to receiver.

1_09

Operation:

Setting control mode Latched: Disconnect Jumper-1 and Jumper-2.

Control mode Latched: Press -> On, other relays Off; Press another button -> Off.

Press button 1: open the air valve, turn on the air compressor.

Press button 2: close the air valve, turn off the air compressor.

Email, RSS Follow

30amp Long Range Remote Module for Air Compressor

Question from customer:

I’m interested in controlling an air compressor remotely. The air compressor is 12v dc and 20 amps. I want this to be a long range remote control system with the ability to accommodate a heavy duty compressor. I only want the remote control to have the “on” and “off” functions for this air compressor.

Answer:

An air compressor is a device that converts power (usually from an electric motor, a diesel engine or a gasoline engine) into kinetic energy by compressing and pressurizing air, which can be released in quick bursts. It is used for sanders, sprayers, nail guns or almost any other types of air tools. Definitely, remote controlling of air compressor is really an easy task, you can switch it on and off from a reliable distance. So we recommend this 30A long range remote control (S1PU-DC12-ANT2+1CB-2) to you.

remote control air compressor

Maximum current of channel is 30amp which is very favorable for your air compressor. With external extend antenna, the transmitter and receiver have longer working range, up to 2000M.

antennaAntenna wire

The remote control operates in toggle, momentary and latched mode (set the mode as you like freely). We suggest setting latched mode because the receiver pairs with 2-button transmitter. One button controls “On”, another button controls “Off”.

Wire air compressor to the receiver as the following picture shown. This receiver is designed with normally open and close configuration. A&B terminals are normally open; A&C terminals are normally closed. Usually we connect device to normally open terminals. Air compressor can be connected to common terminal “A”.

circuit

 

Operation:

Setting control mode Latched: Disconnect Jumper-1 and Jumper-2.

Control mode Latched: Press -> On, other relays Off; Press another button -> Off.

Press big button: Turn on the relay, turn on the air compressor.

Press small button: Turn off the relay, turn off the air compressor.

Email, RSS Follow