heavy duty – Remote Control Everything

30amp Long Range Remote Module for Air Compressor

Question from customer:

I’m interested in controlling an air compressor remotely. The air compressor is 12v dc and 20 amps. I want this to be a long range remote control system with the ability to accommodate a heavy duty compressor. I only want the remote control to have the “on” and “off” functions for this air compressor.

Answer:

An air compressor is a device that converts power (usually from an electric motor, a diesel engine or a gasoline engine) into kinetic energy by compressing and pressurizing air, which can be released in quick bursts. It is used for sanders, sprayers, nail guns or almost any other types of air tools. Definitely, remote controlling of air compressor is really an easy task, you can switch it on and off from a reliable distance. So we recommend this 30A long range remote control (S1PU-DC12-ANT2+1CB-2) to you.

Maximum current of channel is 30amp which is very favorable for your air compressor. With external extend antenna, the transmitter and receiver have longer working range, up to 2000M.

The remote control operates in toggle, momentary and latched mode (set the mode as you like freely). We suggest setting latched mode because the receiver pairs with 2-button transmitter. One button controls “On”, another button controls “Off”.

Wire air compressor to the receiver as the following picture shown. This receiver is designed with normally open and close configuration. A&B terminals are normally open; A&C terminals are normally closed. Usually we connect device to normally open terminals. Air compressor can be connected to common terminal “A”.

Operation:

Setting control mode Latched: Disconnect Jumper-1 and Jumper-2.

Control mode Latched: Press -> On, other relays Off; Press another button -> Off.

Press big button: Turn on the relay, turn on the air compressor.

Press small button: Turn off the relay, turn off the air compressor.

RF Heavy Duty Remote Module for High Power Relay

One customer came to us to find a 12V high power remote which is able to turn on or off a relay 12V30A. He said that he has tried other brand products but they didn’t work well because they were not high power and didn’t activate his relay. He is wondering whether there are any favorable products at our end.

We recommend this model of wireless high power remote switch (S1PU-DC12+2C-2) to him.

One channel is for one device. It is favorable for the device which working current is 30A. Control Lights, Motors, Fans, electrically operated Doors/ Locks/Windows/Blinds/Cars or Other Appliances with AC110~240V or DC0~28V.

You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors. There are three working mode for your choice. They are Toggle, momentary and latched modes.

Setting control mode Toggle: Only connect Jumper-1.

Press button 1: Turn on the relay

Press button 1 again: Turn off the relay

Setting control mode Momentary: Only connect Jumper-2.

Press and hold button 1: Turn on the relay

Release button 1: Turn off the relay

Setting control mode Latched: Disconnect Jumper-1 and Jumper-2.

Press button 1: Turn on the relay

Press button 2: Turn off the relay

As for wiring, please see the wiring diagram. A,B terminals are normally open; A,C terminals are normally close. So being controlled device should be connected to A,B terminals. This device can be activated by dc 0~28V or ac 110~240V. Besides this, the receiver should be supplied dc 12V power supply.

The Application of Inversion Motor Remote Control

Question from customer:

I am trying to purchase a remote that will control a 20 amp 12volt dc motor in both directions momentarily. Could a remote be set with left and right arrows? The high power 2 channel option you have is close but I only require 1 motor to be controlled.

Answer:

We recommend the heavy duty motor remote model—0020526 (S1PF-DC12+1CV-2-2). It is designed to control DC motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals with voltage DC12V / 24V. The maximum working current is 30amp. So you will be satisfied with it. You can rotate the motor in positive or reversal direction with the transmitter (remote control) from any place within a reliable distance (within 500m/ 1500ft); the wireless signal can pass through walls, floors and doors.

The wiring is fairly simple. Connect power supply DC12V / 24V to terminal “INPUT”; connect motor to terminal “OUTPUT”.

Control mode Momentary: Only connect Jumper-1 (CN1) Press and hold button ▲: motor rotates in positive direction. Release button: motor stops

Press and hold button ▼: motor rotates in reversal direction. Release button: motor stops