Remote Control Relay

RF Heavy Duty Remote Module for High Power Relay

One customer came to us to find a 12V high power remote which is able to turn on or off a relay 12V30A. He said that he has tried other brand products but they didn’t work well because they were not high power and didn’t activate his relay. He is wondering whether there are any favorable products at our end.

We recommend this model of wireless high power remote switch (S1PU-DC12+2C-2) to him.

remote controlRelay

One channel is for one device. It is favorable for the device which working current is 30A. Control Lights, Motors, Fans, electrically operated Doors/ Locks/Windows/Blinds/Cars or Other Appliances with AC110~240V or DC0~28V.

You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors. There are three working mode for your choice. They are Toggle, momentary and latched modes.

Setting control mode Toggle: Only connect Jumper-1.

Press button 1: Turn on the relay

Press button 1 again: Turn off the relay


Setting control mode Momentary: Only connect Jumper-2.

Press and hold button 1: Turn on the relay

Release button 1: Turn off the relay


Setting control mode Latched: Disconnect Jumper-1 and Jumper-2.

Press button 1: Turn on the relay

Press button 2: Turn off the relay

As for wiring, please see the wiring diagram. A,B terminals are normally open; A,C terminals are normally close. So being controlled device should be connected to A,B terminals. This device can be activated by dc 0~28V or ac 110~240V. Besides this, the receiver should be supplied dc 12V power supply.