motor remote controller – Remote Control Everything

220V Motor Remote Module Controls Winch with Time Delay Function

Question from customer:

I want a remote control to control a trolley winch. How can I add automatic stop sensors or switches to stop the motor when it gets to each end of the track?

Answer:

Actually, you don’t need to choose automatic stop sensors or switches to stop your motor because this AC power RF time delay motor remote controller (S1FD-AC220+CA-4) features forward-reverse-stop capability and limit switch function. You can rotate the motor in positive or reversal direction by transmitter from any place within a reliable distance, wireless signal pass through walls, floors and doors. With time delay function, the working time of positive/reversal rotation can be adjusted from 10 to 60 seconds. It is suitable for the motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals.

The receiver pairs with transmitter. You can press buttons on the receiver or transmitter to control motor as you like.

Here is the wiring. Connect the live wire to the “L”, and the zero wire to the “N”. Connect AC motor to the “OUT” and the zero wire. You can exchange output wires of motor to change the rotating direction of motor. There two limit switches”S1”&”S2”, if the motor is overdone, you can activate those switches to stop motor.

The usage of this control kit is very simple.

Press button ▲ on the receiver or remote: motor rotates in the positive direction, and it will stop after a certain delay time.

Press button ▼on the receiver or remote: motor rotates in the reversal direction, and it will stop after a certain delay time.

The delay time of positive / reverse rotation can be adjusted from 10 to 60 seconds.

Turn R1/R2 clockwise, prolong the delay time. Turn R1/R2 anti-clockwise, shorten the delay time. When you press button ▲ or button ▼, the motor starts to rotate; it will stop after the delay time is expired.

After press button ▲, you must press button ■ to stop the motor firstly, and then press button ▼.

If you pull out the Jumper of the receiver, you can press directly button ▼ after press button ▲.

Operational Video:

Momentary Motor Remote Control Trailer and Winch

Question:

Our company manufactures a series of trailers that use 12vdc hydraulics to tilt and lower the decks. We also often install electric winches on trailers and are looking for a momentary remote to operate the trailer and the 12vdc electric winch.

Answer:

We think momentary dc 2 channel motor remote controller model of 0020481 (S2PF-DC12 & CV-6) is suitable for you. It can be used to control 2 12vdc motors rotating forward and reversal. Maximum working current is up to 30 Amp. This motor remote controller is applicable to control motors of heavy duty electrical devices and equipment, such as your electric trailer and winch.

Wiring diagram is as follow. Connect wires of 12vdc power supply to terminals “+” and “-”; connect wires of trailer motor to terminals “A1” and “A2”; connect wires of winch motor to terminals “B1” and “B2”.

Setting momentary control mode: connect Jumper-1.

Press and hold button 1: trailer motor rotates in positive direction.
Release button 1: trailer motor stops.
Press and hold button 3: trailer motor rotates in reversal direction.
Release button 3: trailer motor stops.

Press and hold button 2: winch motor rotates in positive direction.
Release button 2: winch motor stops.
Press and hold button 4: winch motor rotates in reversal direction.
Release button 4: winch motor stops.

Online shop: www.carymart.com/

How to Reverse Motor of Awning by Remote Controller?

One of our customers intended to buy a motor remote controller to control a 10amp 12v reversible motor of awning. We recommended model 0020317 (S1FC-DC12 & CV-4) to him.

Here we talk about how to reverse the motor of awnings by this motor remote controller.

Looking at the first picture, it is the electric reversing motor of awnings.

The second picture is our DC motor remote controller kit, including one transmitter and one receiver. It features forward-reverse-stop capability. You can rotate the motor in forward or reversal direction by transmitter from any place within about 500M, wireless signal pass through walls, floors and doors.

Button ▲ on transmitter & receiver is for forward direction.
Button ▼ on transmitter & receiver is for reversal direction.
Button ■ on transmitter & receiver is for stop.

From the third picture, you can see clearly the wire connection of receiver. Connect power supply “+” and “－” to the terminal “IN” and connect DC motor to the terminal “OUT”.

As the forth picture shown:
Press button ▲ on remote or receiver, motor rotates continuously in forward direction.
Press button ■ to stop the motor.
Press button ▼, motor rotates continuously in reversal direction.
Press button ■ to stop the motor.

Online shop: http://www.carymart.com/