Remote Control Winch, Special Remote Control

220V Motor Remote Module Controls Winch with Time Delay Function

Question from customer:

I want a remote control to control a trolley winch. How can I add automatic stop sensors or switches to stop the motor when it gets to each end of the track?

trolley winch

Answer:

Actually, you don’t need to choose automatic stop sensors or switches to stop your motor because this AC power RF time delay motor remote controller (S1FD-AC220+CA-4) features forward-reverse-stop capability and limit switch function. You can rotate the motor in positive or reversal direction by transmitter from any place within a reliable distance, wireless signal pass through walls, floors and doors. With time delay function, the working time of positive/reversal rotation can be adjusted from 10 to 60 seconds. It is suitable for the motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals.

remote controller

 

The receiver pairs with transmitter. You can press buttons on the receiver or transmitter to control motor as you like.

Here is the wiring. Connect the live wire to the “L”, and the zero wire to the “N”. Connect AC motor to the “OUT” and the zero wire. You can exchange output wires of motor to change the rotating direction of motor. There two limit switches”S1”&”S2”, if the motor is overdone, you can activate those switches to stop motor.

circuit

The usage of this control kit is very simple.

Press button ▲ on the receiver or remote: motor rotates in the positive direction, and it will stop after a certain delay time.

Press button ▼on the receiver or remote: motor rotates in the reversal direction, and it will stop after a certain delay time.

The delay time of positive / reverse rotation can be adjusted from 10 to 60 seconds.

Turn R1/R2 clockwise, prolong the delay time. Turn R1/R2 anti-clockwise, shorten the delay time. When you press button ▲ or button ▼, the motor starts to rotate; it will stop after the delay time is expired.

After press button ▲, you must press button ■ to stop the motor firstly, and then press button ▼.

If you pull out the Jumper of the receiver, you can press directly button ▼ after press button ▲.

Operational Video: