Tag: up and down direction

30amp High Power Remote Control 4 Linear Motors

Question from customer:

I have this truck project. I’m using 4 linear actuators to lower and raise a back cover of truck I need a controller that can move 2 linear actuators at a time.

linear actuator

Answer:

Our suggestion is that you can use our 2 channel high power motor controller (S2PF-DC12+CV-6-2).

With high power of 30A, so that you can control DC motors of rolling blinds, doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals with voltage DC12V / 24V. You can rotate the motor in positive or reversal direction with the transmitter (remote control) from any place within a reliable distance; the wireless signal can pass through walls, floors and doors.

1_01

You want to remote move every 2 linear actuators simultaneously, you can wire them in parallel at Output A1&A2 and B1&B2 respectively. Connect terminals “+” and “-” to power supply DC12V / 24V; connect terminals “A1″ and “A2″ to motor 1&2; connect terminals “B1″ and “B2″ to motor 3&4.

circuit

Operation:

Setting control mode Latched: Do not connect Jumper-1 (CN1) or Jumper-2 (CN2)

Press button ▲ on the left: motor 1&2 rotate in up direction at same time.

Press button ▼ on the left: motor 1&2 rotate in down direction at same time.

Press button ■ on the left: motor 1&2 stop

Press button ▲ on the right: motor 3&4 rotate in up direction at same time.

Press button ▼ on the right: motor 3&4 rotate in down direction at same time.

Press button ■ on the right: motor 3&4 stop

Setting control mode Momentary: Only connect Jumper-1 (CN1)

Press and hold button ▲ on the left: motor 1&2 rotate in up direction at same time.

Release button ▲ on the left: motor 1&2 stop

Press and hold button▼ on the left: motor 1&2 rotate in down direction at same time.

Release button ▼ on the left: motor 1&2 stop

Press and hold button ▲ on the right: motor 3&4 rotate in up direction at same time.

Release button▲ on the right: motor 3&4 stop

Press and hold button▼ on the right: motor3&4 rotate in down direction at same time.

Release button ▼ on the right: motor3&4 stop

Email, RSS Follow

Remote Control 4 Linear Actuators Up and Down Simultaneously

Question from customer:

I have this car project. I’m using 4 linear actuators to lower and raise a front spoiler on the bumper. I need a controller that can move all 4 simultaneously.

remote control linear actuator

Answer:

Our suggestion is that you can use our one channel high power motor controller (S1PF-DC12+CV-4-2).

remote controller

With high power of 30A, so that you can control DC motors of rolling blinds, doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals with voltage DC12V / 24V. You can rotate the motor in positive or reversal direction with the transmitter (remote control) from any place within a reliable distance; the wireless signal can pass through walls, floors and doors. You want to remote move 4 linear actuators simultaneously, you can wire them in parallel.

circuit

Operation:

•Connect power supply DC12V / 24V to terminal “INPUT”; connect linear actuators to terminal “OUTPUT”.

•Setting control mode Latched: Do not connect Jumper-1 (CN1) or Jumper-2 (CN2)

Press button ▲: 4 linear actuators rotate in up direction at same time.

Press button ■: linear actuators stop

Press button ▼: 4 linear actuators rotate in down direction simultaneously.

Press button ■: linear actuators stop

•Setting control mode Momentary: Only connect Jumper-1 (CN1)

Press and hold button ▲: 4 linear actuators rotate in up direction at same time.

Release button: linear actuators stop

Press and hold button ▼: 4 linear actuators rotate in down direction simultaneously.

Release button: linear actuators stop

Email, RSS Follow