Question from customer:
I have this car project. I’m using 4 linear actuators to lower and raise a front spoiler on the bumper. I need a controller that can move all 4 simultaneously.
Answer:
Our suggestion is that you can use our one channel high power motor controller (S1PF-DC12+CV-4-2).
With high power of 30A, so that you can control DC motors of rolling blinds, doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals with voltage DC12V / 24V. You can rotate the motor in positive or reversal direction with the transmitter (remote control) from any place within a reliable distance; the wireless signal can pass through walls, floors and doors. You want to remote move 4 linear actuators simultaneously, you can wire them in parallel.
Operation:
•Connect power supply DC12V / 24V to terminal “INPUT”; connect linear actuators to terminal “OUTPUT”.
•Setting control mode Latched: Do not connect Jumper-1 (CN1) or Jumper-2 (CN2)
Press button ▲: 4 linear actuators rotate in up direction at same time.
Press button ■: linear actuators stop
Press button ▼: 4 linear actuators rotate in down direction simultaneously.
Press button ■: linear actuators stop
•Setting control mode Momentary: Only connect Jumper-1 (CN1)
Press and hold button ▲: 4 linear actuators rotate in up direction at same time.
Release button: linear actuators stop
Press and hold button ▼: 4 linear actuators rotate in down direction simultaneously.
Release button: linear actuators stop