I want to use your remote control system control an electromechanical bell. Do you have any kind of remotes suitable?
Answer：
We recommend 1 channel momentary remote kit and doorbell touch switch to you make a wireless doorbell. This 1 channel dc rf remote control momentary switch is with direct power output function. The input and output power are the same. It is easier for wiring and operation and widely applied to control lights, motors, fans, electrically operated doors / locks / windows or other electrical devices. Doorbell touch switch is quick and easy to install, as normal light switch.
How to make them work? Let’s read the following procedure.
The first step, you may solder two terminals of 1-button transmitter backside to doorbell switch “L1&L” terminals backside.
And next, your doorbell should be connected to the receiver like the diagram. Connect doorbell to “A&B” terminal. Then switch on power.
Finally, press the button on switch outdoor, is equivalent to press button of transmitter. The transmitter will send RF signal to receiver. Then, the bell will ring. So it makes a wireless doorbell.
I would like to find a solution to control 6 water scooters (12 V). The idea is that from the beach, I am able to shut down the switch of a user that is getting wild or getting to close to danger. So the longest the control distance is much better.
Answer:
We recommend six 12VDC direct power output receivers (S1XB-DC12-ANT2) with the long distance remote (CB-6). Input power and output power of receiver are same as dc 12v. So it is easy for wiring. The receiver can use the water scooters’s battery to operate and controlled water scooters also can get power through receiver. The usage is also very simple. There are 3 working modes setting in the remote control. They are toggle, momentary and latched. But as for you, you have to use toggle mode. Press button, turn on device; Press button again, turn off device.
Working distance of remote and receiver set is 2000m (6000ft) in open field if we add external extended antenna in it.
Controlling 6 water scooters, you need 6 receivers. Wire each water scooter’s motor to each receiver as the following picture shown.
When any of water scooters is getting wild or getting to close to danger, you can press any button to stop any of them to prevent from accidents. What’s more, it is the long range remote control which can help you control water scooters long distance.
One of our customers said that he installed droplight on the wall of stairs. He wanted to remote control droplight but sometimes it is not convenient to him to have a transmitter.
We recommend him our Smartphone WIFI remote controller WF-8-1R (iOS system). It supports 4.6 ~ 6.1 version iOS software system. That is to say, if you use our WIFI remote control and install our WIFI software in your mobile phone. Your mobile phone will be a transmitter which can work with WIFI controller in pairs to control electric devices.
It is applied in modern agriculture field, smart home, instruments, equipment control. WiFi remote control lights, motors, fan, electric doors / windows, aircraft, remote cars, remote toys, rolling blinds, pumps, winches, or other electrical devices with voltage AC110~240V or DC0~28V.
The following is the presentation.
They are WIFI controller, iPod, AC lamp and 12V adaptor.
Wiring:
Connect AC lamp to the output terminals (B&C) of WIFI controller.
Software installation:
Install the WIFI Controller software to your iPhone, iPad or iPod Touch by iTunes.
Note: Your iPhone, iPad or iPod Touch must be jailbroken.
Switch on the power of WIFI controller. Wait until power led and wifi start-up led turn on. After wireless network connection, press the icon of WIFI Controller software to turn on it.
There are 3 modes in common use. They are toggle, momentary and latched. But we usually use toggle or latched for lighting controlling. And there is “Time Delay” mode in it. Here is the presentation of “Toggle” and ”Time Delay” mode to control AC lamp.
Toggle Controlling:
Set up Toggle control mode: Press the “T” icon of channel 1. Choose T (Toggle) control mode.
Press button 1 and the color of button 1 icon changes to green, AC lamp will be on. Press the icon again, the lamp will be off.
Time Delay Controlling:
Set up Time Delay control mode: Press “0s” icon of channel 1. Enter the delay time, then Press “Ok” icon. The adjustable delay time is range from 1 second to 99 hours. We set delay time 5 seconds.
Press button 1 to turn on the lamp.
After 5 seconds, the lamp is off by itself.
Time Delay mode is much better for you to control your bracket light. If you set the delay time in advance, you don’t have to switch off it again because it is off automatically when delay time is up.
Smartphone WIFI Controller now supports 4.6 ~ 6.1 version iOS system other than 2.1 ~ 4.0 version Android software system. It is another choice of controlling device when you use iPhone, iPad or iPod Touch. Its controlling software is installed in your iPhone, iPad or iPod Touch by iTunes.
We try to demonstrate the controlling of LED light by iPod.
First, we prepare materials and do some wiring.
1×WiFi controller (WF-8-1R)
1×iPod
1×LED light strip
12V power supply for LED light strip
9V power supply for WiFi controller
Some lines
Here is wiring.
After switching on the power, 3 LED indication lights on the controller are on one by one. (iPod has connected to WIFI controller when 3 LED indication lights are all on.) We can start the operation.
Press WIFI controller software icon and press ”Connect” icon.
Press “T” to set “Toggle Mode”.
Press button 1, turn on the light strip. Press button 1 again, turn off the light strip.
Press”0s” to set “Time Delay Mode”. Set the timer for 5 seconds and turn on the light.
One customer came to us to find a 12V high power remote which is able to turn on or off a relay 12V30A. He said that he has tried other brand products but they didn’t work well because they were not high power and didn’t activate his relay. He is wondering whether there are any favorable products at our end.
One channel is for one device. It is favorable for the device which working current is 30A. Control Lights, Motors, Fans, electrically operated Doors/ Locks/Windows/Blinds/Cars or Other Appliances with AC110~240V or DC0~28V.
You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors. There are three working mode for your choice. They are Toggle, momentary and latched modes.
Setting control mode Toggle: Only connect Jumper-1.
Press button 1: Turn on the relay
Press button 1 again: Turn off the relay
Setting control mode Momentary: Only connect Jumper-2.
Press and hold button 1: Turn on the relay
Release button 1: Turn off the relay
Setting control mode Latched: Disconnect Jumper-1 and Jumper-2.
Press button 1: Turn on the relay
Press button 2: Turn off the relay
As for wiring, please see the wiring diagram. A,B terminals are normally open; A,C terminals are normally close. So being controlled device should be connected to A,B terminals. This device can be activated by dc 0~28V or ac 110~240V. Besides this, the receiver should be supplied dc 12V power supply.
Follow
