2 channel – Page 3 – Remote Control Everything

Telephone Switch for 2 LED Lamps

When you drive back home very late after knocking off from office for extra hours, you might want your garage outside door lamp to be on before your arrival in order to park car as soon as possible . You might wonder that is there any favorable product can solve this problem when you nearly arrive home? Of course, there is a solution. Your making a telephone call can turn on your garage door lamp when you are on your way home.

How does it work? Let’s see the presentation. We will show you step by step. Material preparation is as follow.

1×telephone remote control module

1×mobile phone

1×telephone line

2×LED lamps

2×DC 12V adaptors

Two lines

Here is the wiring diagram and picture. Telephone line is plugged into the telephone socket on the telephone remote control module. Remote control module should be supplied 12V power. Connect two led lamps to two relays and the same adaptor.

Dial the telephone number with mobile phone, the telephone could be connected automatically after 6 ringing (about 33 seconds).

Then input the preset password “5678″ to enter into the menu. (Protective password makes it different from ordinary telephone call. If you don’t input password when the telephone put through, you cannot control the remote module.). Modify the password (4 bits): Press button “*” + “new password” + “*”.

Press button 1, turn on the red lamp. Press button 2, turn off the red lamp.

Press button 3, turn on the blue lamp. Press button 4, turn off the blue lamp.

Press button “#”, ring off. (If you do not press button “#”, the telephone will hang up automatically after 75 seconds.)

The remote controlling of garage door lamp has realized easily. You can dial telephone call when you nearly arrive home to turn on garage door lamp and turn off it after your arrival. That is very convenient.

This telephone remote control module is capable of controlling any electric devices.

Perhaps you will be on business for several days, even go abroad, you only to make a telephone call to your home fixed telephone, this kind of remote control can help you to water your flowers regularly every day.

If you are ready to go out for business or participate in camp activity, this kind of remote control can help you feed your pets as long as you make a telephone call regularly after your installing it to your DIY pet feeder in advance.

No matter what kind of phones you use to dial, the telephone remote control module will be activated when you dial the number of the controlled phone.

Operational Video:

How to Remote Control Screens

Question from customer:

We require an RF remote controller with 2 channel output 24v dc power supply to control screens. Then it can be operate nearly 35 meters. Remote controller can operate when we press remote button. When we release the remote button, remote controller will not operate.

Answer:

We recommend you the model of 2 channel direct power output momentary remote controller (S2XM-DC24+C-2). The operating voltage is 24V. The working distance is 100m. Direct power output; control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances. You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors. It is momentary working mode. Momentary mode can be set to control rolling blind or rolling door. You need to press and hold the button of remote to make the blind or door open/close. Momentary mode is motivated by single relay, which means you can work these two modes with single button remote.

Wiring:

Screen 1 is connected to the A&B terminals of OUTPUT 1. Screen 2 is connected to the A&B terminals of OUTPUT 2. The receiver can be supplied 24V power supply.

Usage:

Press and hold button 1: Turn on the relay 1, switch on screen 1.

Release the button: Turn off the relay 1, switch off screen 1.

Press and hold button 2: Turn on the relay 2, switch on screen 2.

Release the button: Turn off the relay 2, switch off screen 2.

AC Triggered Remote Controller Controls AC Motor

This 2 Channel RF AC Remote Controller is driven by AC power supply, which operates in toggle, momentary, latched and toggle +momentary modes (just set according to your requirement).It is very favorable for DC/AC electric devices which are hard to reach or far away from switch. It is widely used for lamps, doors, garage doors, motors and so on. Working voltage range of relay is AC 110~240V or DC 0~28V. The Maximum working current of each channel is 10amp. Sometimes, it’s not ideal and convenient to get someone to go back and forth to turn this device on/off, so remote control is your better choice. AC power supply driven remote controller can also control AC motor.

We will try to show you how to control positive and reversal rotation of an AC motor with this remote module. Let’s see the following material.

1×2CH RF AC receiver

1×2-button transmitter

1×AC motor

Power supply

Here is the wiring. There is difference with DC power supply activated remote control. Terminals L&N is supposed to connect to a plug which is inserted into a power strip with AC power supply.

We usually set “Momentary Mode” for motor control. Only connect Jumper-1. It is an easy operation.

Press and hold button 1, the motor rotates in positive direction. Release the button, motor stops.

Press and hold button 2, the motor rotates in reversal direction. Release the button, motor stops.

Short Video:

AC Motor is Driven By 2CH RF DC Remote Controller

This Multi-mode RF DC remote control kit is activated by DC power supply, which operates in toggle, momentary, latched and toggle +momentary modes (just set according to your requirement).It is very favorable for lights or other DC/AC electric devices which are hard to reach or far away from switch. This 2 channel remote control kit can help you complete two operations at the same time. It is widely used for lights, gates, garage doors, motors and so on.

We will try to show you how to control positive and reversal rotation of an AC motor with this remote module. Let’s see the following material.

1×2CH rf receiver

1×2-button transmitter

1×AC motor

Power supply

Here is the wiring.

We usually set “Momentary Mode” for motor control. Only connect Jumper-1. It is an easy operation.

Press and hold button 1, the motor rotates in positive direction. Release the button, motor stops.

Press and hold button 2, the motor rotates in reversal direction. Release the button, motor stops.

Long Range Control 4 LED Lamps—On to Many Series System

Question from customer:

I am looking for a long range (1000m theoretically) RF control. The transmitter can be 4 buttons. The receivers should be 12V DC models with 2 channels each and a remote antenna for each receiver.

Our answer:

We recommend 2 channel one to many remote control kit—S2UB-DC12+CB-4. The receiver is designed for one-transmitter-many-receivers system. There are two channels for each receiver. You can use 2 receivers with transmitter CV-4 or CB-4. For the transmitter, we recommend CB-4 to you because the working distance of this transmitter can be 1000m when it pairs with the receiver. As your requirement, you want to add a remote antenna for each receiver. Certainly, you can choose external antennas for them (see the following pictures). With the extended external antennas, the transmitting distance will reach about 2000m in the open air. This kit is also a multi-mode remote control which includes four working modes, toggle, momentary, latched and momentary+toggle.

We should prepare two receivers, one transmitter, 4 lamps, and 12V power supply.

This is the wiring diagram. According to the left side diagram, two led lamps are both connected to common terminals B of two relays and using wires to connect normally open terminals C of two relays. Then, two lamps is supplied 12 V power supply. On the other hand, we should offer power supply to the receiver. Do the same procedure for another receiver.