positive and reversal rotation – Remote Control Everything

How to Substitute Remote Controller for DPDT Switch to Control AC Motor

A DPDT switch has six connections, but since polarity reversal is very common usage of DPDT switches. DPDT switch can be wired to motor to realize positive and reversal rotation. Recently, we develop a kind of 4 channel wireless remote controller kit (S4PA-AC220+CV-4-2) which aims at replace DPDT switch to remote control other appliances, lights, motors, fans, electrically operated doors / locks / windows / blinds / cars…

The following video will show you how to substitute remote controller kit for DPDT switch.

1 Channel RF Motor Remote Controller for Motor of Garage Door

Question from customer:

I have a garage door with a motor connected. I don’t have a control board or remotes for it. So I was looking at the RF models. The motor I have is a standard 12v garage roller door opener.

Answer:

This DC RF Motor Remote Controller features in forward-reverse-stop capability. You can rotate the motor in positive or reversal direction by transmitter from any place within a reliable distance, wireless signal pass through walls, floors and doors. With time delay function, the working time of positive/reversal rotation can be adjusted from 10 to 60 seconds. Besides ordinary functions, this motor controller has limit switch which can be activated to stop motor rotation automatically when the rotation is overdone.

Wiring and operation:

Connect power supply DC 12V to the terminals “IN”. Connect DC motor to the “OUT”. You can exchange the output wires of motor to change the rotating direction of motor.

Press button ▲: Light 1 shines, motor rotates in the positive direction, and it will stop after a certain delay time.

Press button ▼: Light 2 shines, motor rotates in the reversal direction, and it will stop after a certain delay time.

The delay time of positive / reversal rotation can be adjusted from 10 to 60 seconds. Turn R1/R2 clockwise, prolong the delay time. Turn R1/R2 anti-clockwise, shorten the delay time. When you press button ▲ or button ▼, the motor starts to rotate; It will stop after the delay time is expired.

After press button ▲, you must press button ■ to stop motor firstly, and then press button ▼.

If you pull out the Jumper of the receiver, you can press directly button ▼ after press button ▲.

It is also suitable for the motors of rolling blinds, projection screens, awnings, pumps, winches, conveyors or other appliances and machineries with voltage DC12V.

Click here:

1 CH DC12V RF Motor Remote Controller

AC Triggered Remote Controller Controls AC Motor

This 2 Channel RF AC Remote Controller is driven by AC power supply, which operates in toggle, momentary, latched and toggle +momentary modes (just set according to your requirement).It is very favorable for DC/AC electric devices which are hard to reach or far away from switch. It is widely used for lamps, doors, garage doors, motors and so on. Working voltage range of relay is AC 110~240V or DC 0~28V. The Maximum working current of each channel is 10amp. Sometimes, it’s not ideal and convenient to get someone to go back and forth to turn this device on/off, so remote control is your better choice. AC power supply driven remote controller can also control AC motor.

We will try to show you how to control positive and reversal rotation of an AC motor with this remote module. Let’s see the following material.

1×2CH RF AC receiver

1×2-button transmitter

1×AC motor

Power supply

Here is the wiring. There is difference with DC power supply activated remote control. Terminals L&N is supposed to connect to a plug which is inserted into a power strip with AC power supply.

We usually set “Momentary Mode” for motor control. Only connect Jumper-1. It is an easy operation.

Press and hold button 1, the motor rotates in positive direction. Release the button, motor stops.

Press and hold button 2, the motor rotates in reversal direction. Release the button, motor stops.

Short Video:

AC Motor is Driven By 2CH RF DC Remote Controller

This Multi-mode RF DC remote control kit is activated by DC power supply, which operates in toggle, momentary, latched and toggle +momentary modes (just set according to your requirement).It is very favorable for lights or other DC/AC electric devices which are hard to reach or far away from switch. This 2 channel remote control kit can help you complete two operations at the same time. It is widely used for lights, gates, garage doors, motors and so on.