How to Remote Control Screens

Question from customer:

We require an RF remote controller with 2 channel output 24v dc power supply to control screens. Then it can be operate nearly 35 meters. Remote controller can operate when we press remote button. When we release the remote button, remote controller will not operate.

Answer:

We recommend you the model of 2 channel direct power output momentary remote controller  (S2XM-DC24+C-2). The operating voltage is 24V. The working distance is 100m. Direct power output; control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances. You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors. It is momentary working mode. Momentary mode can be set to control rolling blind or rolling door. You need to press and hold the button of remote to make the blind or door open/close. Momentary mode is motivated by single relay, which means you can work these two modes with single button remote.

remote controller

Wiring:

Screen 1 is connected to the A&B terminals of OUTPUT 1. Screen 2 is connected to the A&B terminals of OUTPUT 2. The receiver can be supplied 24V power supply.

circuit

Usage:

Press and hold button 1: Turn on the relay 1, switch on screen 1.

Release the button: Turn off the relay 1, switch off screen 1.

Press and hold button 2: Turn on the relay 2, switch on screen 2.

Release the button: Turn off the relay 2, switch off screen 2.