dc12V – Remote Control Everything

Twelve 6V/9V/12V/24V Receivers and 1 Transmitter Kit

This rf remote controller (12S1UB-DC06/09/12/24 & CV-12 ) has the special ability to learn remote codes, allowing it to be used in one-transmitter-to-many-receivers system. It operates in toggle, momentary, and latched mode (switch modes as you like freely by connecting or disconnecting jumper). It is great for hard to reach lights or other DC/AC electrical devices, remote distance can be 500m (theoretically). Control lights, motors, fans, electrically operated doors / locks / windows / blinds / cars or other appliances with voltage AC110~240V or DC0~28V.

We’d like to show the wiring and controlling of ac, dc lamps or dc motors.

The contact of relay of each receiver is normally open/ closed. So you need to wire ac lamp to normally open contact B&C and supply AC 220V power to lamp. When you want to remote control dc motors or lamps, you can wire them to receivers as mentioned above. But dc motor and lamps can share the same power supply if you wire as the right picture shown.

Setting control mode Toggle: Connect Jumper-2.

Control mode Toggle: Press -> On; Press again -> Off.

Press button 1: Turn on Receiver 1 (connect B and C, disconnect A and B)

Press button 1 again: Turn off Receiver 1 (disconnect B and C, connect A and B)

…

Press button 12: Turn on Receiver 12 (connect B and C, disconnect A and B)

Press button 12 again: Turn off Receiver 12 (disconnect B and C, connect A and B)

Setting control mode Momentary: Connect Jumper-1.

Control mode Momentary: Press and hold -> On; Release -> Off.

Press and hold button 1: Turn on Receiver 1 (connect B and C, disconnect A and B)

Release button 1: Turn off Receiver 1 (disconnect B and C, connect A and B)

…

Press and hold button 12: Turn on Receiver 12 (connect B and C, disconnect A and B)

Release button 12: Turn off Receiver 12 (disconnect B and C, connect A and B)

Setting control mode Latched: Disconnect Jumper-1 and Jumper-2.

Control mode Latched: Press -> On, other relays Off; Press another button -> Off.

Press button 1: Turn on Receiver 1 (connect B and C, disconnect A and B)

Press other button: Turn off Receiver 1 (disconnect B and C, connect A and B)

…

Press button 12: Turn on Receiver 12 (connect B and C, disconnect A and B)

Press other button: Turn off Receiver 12 (disconnect B and C, connect A and B)

Momentary&Toggle Mode Remote Controller for Motor and Lamp

We are about to recommend remote controller which is applied to both motor and lamp. It is DC12V momentary &toggle remote controller (S1F-DC12 & C-3-2), which features in motor forward-reverse capability. You can rotate the motor in positive or reversal direction by transmitter from any place within a reliable distance, wireless signal pass through walls, floors and doors. It is suitable for the motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals with voltage DC12V. We also design lamp controlling function so that you can control motor and lamp with the same transmitter.

Telephone Switch for 2 LED Lamps

When you drive back home very late after knocking off from office for extra hours, you might want your garage outside door lamp to be on before your arrival in order to park car as soon as possible . You might wonder that is there any favorable product can solve this problem when you nearly arrive home? Of course, there is a solution. Your making a telephone call can turn on your garage door lamp when you are on your way home.

How does it work? Let’s see the presentation. We will show you step by step. Material preparation is as follow.

1×telephone remote control module

1×mobile phone

1×telephone line

2×LED lamps

2×DC 12V adaptors

Two lines

Here is the wiring diagram and picture. Telephone line is plugged into the telephone socket on the telephone remote control module. Remote control module should be supplied 12V power. Connect two led lamps to two relays and the same adaptor.

Dial the telephone number with mobile phone, the telephone could be connected automatically after 6 ringing (about 33 seconds).

Then input the preset password “5678″ to enter into the menu. (Protective password makes it different from ordinary telephone call. If you don’t input password when the telephone put through, you cannot control the remote module.). Modify the password (4 bits): Press button “*” + “new password” + “*”.

Press button 1, turn on the red lamp. Press button 2, turn off the red lamp.

Press button 3, turn on the blue lamp. Press button 4, turn off the blue lamp.

Press button “#”, ring off. (If you do not press button “#”, the telephone will hang up automatically after 75 seconds.)

The remote controlling of garage door lamp has realized easily. You can dial telephone call when you nearly arrive home to turn on garage door lamp and turn off it after your arrival. That is very convenient.

This telephone remote control module is capable of controlling any electric devices.

Perhaps you will be on business for several days, even go abroad, you only to make a telephone call to your home fixed telephone, this kind of remote control can help you to water your flowers regularly every day.

If you are ready to go out for business or participate in camp activity, this kind of remote control can help you feed your pets as long as you make a telephone call regularly after your installing it to your DIY pet feeder in advance.

No matter what kind of phones you use to dial, the telephone remote control module will be activated when you dial the number of the controlled phone.

Operational Video: