AC Motor is Driven By 2CH RF DC Remote Controller

This Multi-mode RF DC remote control kit is activated by DC power supply, which operates in toggle, momentary, latched and toggle +momentary modes (just set according to your requirement).It is very favorable for lights or other DC/AC electric devices which are hard to reach or far away from switch. This 2 channel remote control kit can help you complete two operations at the same time. It is widely used for lights, gates, garage doors, motors and so on.

We will try to show you how to control positive and reversal rotation of an AC motor with this remote module. Let’s see the following material.

1×2CH rf receiver

1×2-button transmitter

1×AC motor

Power supply

Here is the wiring.

We usually set “Momentary Mode” for motor control. Only connect Jumper-1. It is an easy operation.

Press and hold button 1, the motor rotates in positive direction. Release the button, motor stops.

Press and hold button 2, the motor rotates in reversal direction. Release the button, motor stops.

Leave a Reply