September 2013 – Page 2 – Remote Control Everything

How to Remote Control Droplight with Mobile Phone

One of our customers said that he installed droplight on the wall of stairs. He wanted to remote control droplight but sometimes it is not convenient to him to have a transmitter.

We recommend him our Smartphone WIFI remote controller WF-8-1R (iOS system). It supports 4.6 ~ 6.1 version iOS software system. That is to say, if you use our WIFI remote control and install our WIFI software in your mobile phone. Your mobile phone will be a transmitter which can work with WIFI controller in pairs to control electric devices.

It is applied in modern agriculture field, smart home, instruments, equipment control. WiFi remote control lights, motors, fan, electric doors / windows, aircraft, remote cars, remote toys, rolling blinds, pumps, winches, or other electrical devices with voltage AC110~240V or DC0~28V.

The following is the presentation.

They are WIFI controller, iPod, AC lamp and 12V adaptor.

Wiring:

Connect AC lamp to the output terminals (B&C) of WIFI controller.

Software installation:

Install the WIFI Controller software to your iPhone, iPad or iPod Touch by iTunes.

Note: Your iPhone, iPad or iPod Touch must be jailbroken.

Switch on the power of WIFI controller. Wait until power led and wifi start-up led turn on. After wireless network connection, press the icon of WIFI Controller software to turn on it.

There are 3 modes in common use. They are toggle, momentary and latched. But we usually use toggle or latched for lighting controlling. And there is “Time Delay” mode in it. Here is the presentation of “Toggle” and ”Time Delay” mode to control AC lamp.

Toggle Controlling:

Set up Toggle control mode: Press the “T” icon of channel 1. Choose T (Toggle) control mode.

Press button 1 and the color of button 1 icon changes to green, AC lamp will be on. Press the icon again, the lamp will be off.

Time Delay Controlling:

Set up Time Delay control mode: Press “0s” icon of channel 1. Enter the delay time, then Press “Ok” icon. The adjustable delay time is range from 1 second to 99 hours. We set delay time 5 seconds.

Press button 1 to turn on the lamp.

After 5 seconds, the lamp is off by itself.

Time Delay mode is much better for you to control your bracket light. If you set the delay time in advance, you don’t have to switch off it again because it is off automatically when delay time is up.

Video:

Extended Range Remote for Wharf Lights

Question from customer:

I am installing 12v DC lighting on my boat wharf. It will operate off a 12v battery with a solar charger. I need a long range on/off remote for the lights. My house is about 400 ft away. I have no AC power at the wharf. I was planning on two 12 v lights.

Answer:

We recommend you 2 one-many-system single channel receivers (S1UB-DC12-ANT2) and the long range remote (CB-2). The DC power activated remote is so favorable to you since you have a 12V battery with solar charger. The one-many-system means that you can use one transmitter control more than two receivers. There is no interference between two receivers because they are powered by different adaptors. With external extended antenna, working distance of remote controller extends 1500m, up to 2000m without any obstacles in the open field. So it is believed that the signal can be transmitted from your house to the wharf successfully.

We make a presentation of this kind of remote. First, here is the material preparation.

2×1 channel receiver (S1UB-DC12-ANT2)

1×long range transmitter(CB-2)

2×LED light(DC 12V)

2×12V adaptor

Some lines

The wiring is so simple. Each receiver is connected to LED light and adaptor. Switch on the power.

Press big button, turn on the red light( wharf light).

Press big button again, turn off red light( wharf light).

Press small button, switch on blue light( wharf light).

Press small button again, switch off blue light( wharf light).

Enjoyable Video:

Long Range and One-Many-System Remote Control —2000M

Question from customer:

I need a system with 1 Transmitter and 15 Receivers.

The 15 Receivers will be “remote receivers” and will be located in 15 separate locations.

This 1 Transmitter will control all 15 remote Receivers (buttons 1 through15 on the Transmitter).

Range = 300m-500m

Voltage = 12VDC

Ampere = 1.0 – 5.0 Amps

Answer：

We’d like to recommend you “One-to-Many System”. It includes a 15-button transmitter and 15 long range receivers. They can work together and their working distance is 2000M with external extended antenna. The maximum working current is 10 ampere. Each receiver is 1 channel, which can connect to one device. Control Lights, Motors, Fans, electrically operated Doors / Locks / Windows / Blinds / Cars or Other Appliances with AC110~240V or DC0~28V. You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors. There are 3 working modes for each receiver. They are toggle, momentary and latched.

Here is the wiring diagram. It is the normally open and normally closed connection. You can connect device to normally open terminals B&C.

1, Setting control mode Toggle: Connect Jumper-2.

Control mode Toggle: Press -> On; Press again -> Off.

Press button 1: Turn on Receiver 1

Press button 1 again: Turn off Receiver 1

…

Press button 15: Turn on Receiver 15

Press button 15 again: Turn off Receiver 15

2, Setting control mode Momentary: Connect Jumper-1.

Control mode Momentary: Press and hold -> On; Release -> Off.

Press and hold button 1: Turn on Receiver 1

Release button 1: Turn off Receiver 1

…

Press and hold button 15: Turn on Receiver 15

Release button 15: Turn off Receiver 15

3, Setting control mode Latched: Disconnect Jumper-1 and Jumper-2.

The transmitter buttons are odd number, you’d better not set latched mode because buttons must work in pairs in latched mode.

Telephone Switch for 2 LED Lamps

When you drive back home very late after knocking off from office for extra hours, you might want your garage outside door lamp to be on before your arrival in order to park car as soon as possible . You might wonder that is there any favorable product can solve this problem when you nearly arrive home? Of course, there is a solution. Your making a telephone call can turn on your garage door lamp when you are on your way home.

How does it work? Let’s see the presentation. We will show you step by step. Material preparation is as follow.

1×telephone remote control module

1×mobile phone

1×telephone line

2×LED lamps

2×DC 12V adaptors

Two lines

Here is the wiring diagram and picture. Telephone line is plugged into the telephone socket on the telephone remote control module. Remote control module should be supplied 12V power. Connect two led lamps to two relays and the same adaptor.

Dial the telephone number with mobile phone, the telephone could be connected automatically after 6 ringing (about 33 seconds).

Then input the preset password “5678″ to enter into the menu. (Protective password makes it different from ordinary telephone call. If you don’t input password when the telephone put through, you cannot control the remote module.). Modify the password (4 bits): Press button “*” + “new password” + “*”.

Press button 1, turn on the red lamp. Press button 2, turn off the red lamp.

Press button 3, turn on the blue lamp. Press button 4, turn off the blue lamp.

Press button “#”, ring off. (If you do not press button “#”, the telephone will hang up automatically after 75 seconds.)

The remote controlling of garage door lamp has realized easily. You can dial telephone call when you nearly arrive home to turn on garage door lamp and turn off it after your arrival. That is very convenient.

This telephone remote control module is capable of controlling any electric devices.

Perhaps you will be on business for several days, even go abroad, you only to make a telephone call to your home fixed telephone, this kind of remote control can help you to water your flowers regularly every day.

If you are ready to go out for business or participate in camp activity, this kind of remote control can help you feed your pets as long as you make a telephone call regularly after your installing it to your DIY pet feeder in advance.

No matter what kind of phones you use to dial, the telephone remote control module will be activated when you dial the number of the controlled phone.

Operational Video:

8 Channel Power Output WIFI Controller Switches LED Strip On and Off

A brand new Smartphone WIFI controller (android system) supports 2.1 ~ 4.0 version Android software system. It is still WIFI interface and it controls devices via WIFI connection. The most remarkable characteristic is that AC and DC power direct output, which means that when you supply ac power, output terminals are ac power output; when you supply dc power, output terminals are dc power output. It is applied in modern agriculture field, smart home, instruments, equipment control. WiFi remote control lights, motors, fan, electric doors / windows, aircraft, remote cars, remote toys, rolling blinds, pumps, winches, or other electrical devices with voltage AC110~240V or DC0~28V.

We will show you the WIFI controlling of LED strip and we have to prepare the following material.

1×Smartphone WIFI controller

1×mobile phone (android system)

1×LED lamp

2×power adaptor

Some lines

This is the WIFI controlling of LED strip’s wiring. Look at the little picture in the following picture. We connect the DC 12V adaptor to the ”Power Input ” terminal. On the other hand, output terminal will output 12V to the LED strip. If there is AC power input, the output terminals will output AC power to the controlled devices.

After simple wiring, we switch on the power. The “power” LED light is on. With the shining of the WiFi “Ready” LED light, we turn on WiFi of mobile phone. The WiFi “Link” LED light is on. We press the control software installed in the mobile phone and press the “Connect”.