Long Range and One-Many-System Remote Control —2000M

Question from customer:

I need a system with 1 Transmitter and 15 Receivers.

The 15 Receivers will be “remote receivers” and will be located in 15 separate locations.

This 1 Transmitter will control all 15 remote Receivers (buttons 1 through15 on the Transmitter).

Range = 300m-500m

Voltage = 12VDC

Ampere = 1.0 – 5.0 Amps

Answer

We’d like to recommend you “One-to-Many System”. It includes a 15-button transmitter and 15 long range receivers. They can work together and their working distance is 2000M with external extended antenna. The maximum working current is 10 ampere. Each receiver is 1 channel, which can connect to one device. Control Lights, Motors, Fans, electrically operated Doors / Locks / Windows / Blinds / Cars or Other Appliances with AC110~240V or DC0~28V. You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors. There are 3 working modes for each receiver. They are toggle, momentary and latched.

one to many series

Here is the wiring diagram. It is the normally open and normally closed connection. You can connect device to normally open terminals B&C.

circuit

1, Setting control mode Toggle: Connect Jumper-2.

Control mode Toggle: Press -> On; Press again -> Off.

Press button 1: Turn on Receiver 1

Press button 1 again: Turn off Receiver 1

Press button 15: Turn on Receiver 15

Press button 15 again: Turn off Receiver 15

 

2, Setting control mode Momentary: Connect Jumper-1.

Control mode Momentary: Press and hold -> On; Release -> Off.

Press and hold button 1: Turn on Receiver 1

Release button 1: Turn off Receiver 1

Press and hold button 15: Turn on Receiver 15

Release button 15: Turn off Receiver 15

 

3, Setting control mode Latched: Disconnect Jumper-1 and Jumper-2.

The transmitter buttons are odd number, you’d better not set latched mode because buttons must work in pairs in latched mode.