May 2013 – Page 2 – Remote Control Everything

AC Lamps are Controllable via Smart Mobile Phone WiFi Controller

Your mobile phone can be a remote controller if you use our new product—mobile phone WiFi controller. Receiver box contains 8 relays and can receive WiFi signal. The control software we designed should be installed to your mobile phone before you start to use our product.

It will be widely used to our home appliances and can establish a home WiFi controlling network. Let’s show how it control AC lamp easily.

First, we prepare materials and do some wiring.

1×WiFi controller (WF-8-1R)

1×mobile phone (Android System)

2×AC lamps

Power supply

After simple wiring, we connect AC lamps and controller to power supply respectively. The power LED light is on. With the shining of the WiFi start-up LED light, we turn on WiFi of mobile phone. The WiFi connection status LED light is on. We press the control software installed in the mobile phone and press the ”Connect”.

Then, let’s try the “Toggle” Mode first.

Press button 1, turn on light 1; Press button 1 again, turn off light 1.

Press button 2, turn on light 2; Press button 2 again, turn off light 2.

All on & All off Mode:

Press “All on”, all lights are on. Press “All off”, all lights are off.

Time Delay Mode:

Set the timer for 5 seconds, then turn on light 1. Light 1 will be off after 5 seconds.

Thanks to the mobile phone WiFi controller to make life a lot of fun and accessible because you can get easily access to control your many home appliances not just home lighting.

http://www.youtube.com/watch?v=jyZq07K61GU&feature=youtu.be

Training Systems are Remotely Controllable with One Controller

Question from customer:

We have 2 training systems that run on your remote controls 1 system requires 8 channels and 1 system requires only 4 channels.

Is there any way to program a 12 channel hand held remote to allow control of both systems with 1 hand held remote?

What would we have to order and how would we program the hand held to “talk” to both the 8 and 4 channels remote receivers?

Answer:

Firstly, we can select 8 channels receiver for the first training system and 4 channels receiver for the second training system.

To realize one transmitter to control those two training systems, the software of those two receivers should be reprogrammed by us in advance. And choose this 12 buttons transmitter to control both two receivers.

Button 1 to Button 8 control the first training system. Button 9 to Button 12 control the second system.

Online shop: www.carymart.com

6 Stage Lights Remotely Controllable by One controller

Question from customer:

For a stage, I must achieve six lights to be wirelessly and remotely controllable. These “lights” will be placed in wooden cubes perforated, which will be moved on stage, and must be turned on and off from the technical table located 10 to 15 meters scene.

Answer:

We pick out this control kit from one-to- many control series. One transmitter and 6 receivers can solve this problem. In one-to-many control series, receiver can pair with stage lights you want to control by using a transmitter. With one transmitter at hand you will control stage lights at ease. There is no need to walk back and forth to switch on or off stage lights.

Those 6 receivers connect to 6 lights respectively.

Press button 1, switch stage light 1 on and off.

Press button 2, switch stage light2 on and off.

…

Press button 6, switch stage light 6 on and off.

Now, is one-to-many series remote controller kit not your better choice?

Online shop: www.carymart.com

Trailer Lights Controlled by Remote controller

In scorching summer, many a families will drive to seashore with their boats to be ready to sail on the sea with joy. Usually, most of them put their boat to the trailer which is pulled by a car or other vehicle. Sometimes, people intend to add a trailer to their car or other vehicle by themselves. They are keen on this refit.

However, the boat on the trailer will shelter from lights of car or other vehicle. People who drive back from you cannot judge whether you want to turn or brake.

Wireless remote controller is exactly helpful for this situation. You don’t have to do some complicated wirings when you decide to add a trailer at the end of your car or other vehicle. This handy, foolproof and available remote controller is your better choice. This remote controller set has two parts. One is the wireless transmitter module, the other is a receiver box. We can use wireless transmitter module and a receiver box to solve this problem.

We use module above to connect to car or trunk’s lights, and then connect receiver lights of trailer. One module and a receiver above can be applied a pair of lights of car and trailer respectively. You can connect lights as many as you want to control with two or more control kits.

When you switch on the car or other vehicles’ lights, “ON” signal will be sent to the receiver to switch on the lights of trailer. Then switch off lights, switch off the trailer’s lights.

Online shop: www.carymart.com

Remote Controllable Automatic Pool Cover by High Power Remote Control System

Question from customer:

I need an RF remote controller for a pool cover. This has to be heavy duty and be able to handle 15AMP. I need a forward-reverse, however, it needs to stop immediately without time delay.

Answer:

With the benefits of safety, convenience, water conservation, energy efficiency and easier maintenance, swimming pool covers have increased being used for many families recently. People prefer to use automatic pool cover. Automatic covers cover and uncover the pool by pushing a button which makes more convenience. Have you ever thought about control your pool cover within a reliable distance with remote controller? That is the remote controllable automatic pool cover. But how to remotely control pool cover?

First we need a receiver box to install to motor of your pool cover and a transmitter to instruct the receiver to work. So remote controllable a pool cover, maybe you are looking forward to knowing how it work.

This handy gadget can make high power AC motor rotate forward and reverse.

Here is the wiring picture:

Operation:

We aim to how to make this remote controllable automatic pool cover work in this step. After wiring, we press button A to open pool cover with motor rotate in forward direction. Press button C, the motor stop rotating. We press button B to close pool cover with motor rotate in reversal direction. Press button C, the motor stop rotating.

Through remote controlling motor of pool cover rotate forward and reverse, we can control it open or close in a reliable distance anytime.

Online shop: www.carymart.com