May 2013 – Page 3 – Remote Control Everything

Firework Ignitor System for launching 2 Electric Igniters Remotely

Beautiful fireworks burst in the night. Usually, we use manual ignitor to ignite fireworks. It is so dangerous for us to ignite firework without safe distance. Accidental burning or injured happened from time to time. Why not try a safer solution with remote controller to ignite firework? Firework ignitor system may be very favorable at that time.

Let’s try to demonstrate how to use the firework ignitor system to ignite fireworks.

First, we need the following material.

1× receiver box of firework ignitor system

1×transmitter

2×electric igniters

Second, it is fairly simple connection:

Connect two wires of electric igniter 1 to Out A; Then connect two wires of electric igniter 2 to Out B. Switch on the receiver after connections.

Press button 1, ignite igniter 1.

Press button 1, ignite igniter 2.

Short Video:

http://www.youtube.com/watch?v=S_NgSziVcvc&feature=youtu.be

Online shop: www.carymart.com

Caution:

Any inflammable and explosives material must be far away when igniting fireworks.

Anyone is far away from the firework more than 50m when it is ignited.

Firework Ignitor System for launching 2 Electric Fireworks Remotely

Fireworks burst at curtain of the night just like flowers in blossom, giving us stunning visual sense and bringing high spirit in festivals or big events.

However, some people may be injured during playing fireworks because of improper use. If we play fireworks by a little gadget, the accidental burning can be reduced. Firework remote controller may be a better choice when we ignite fireworks.

We try to demonstrate how to use the firework ignitor system to ignite firework.

First, we need the following material.

1× receiver box of firework ignitor system

1×transmitter

2×electric fireworks

Second, connection is fairly simple:

Connect two wires of electric firework 1 to Out A; Then connect two wires of electric firework 2 to Out B. Switch on the receiver after connections.

Press button 1, ignite firework 1.

Press button 2, ignite firework 2.

Short Video:

http://www.youtube.com/watch?v=-x2z1NYPORE&feature=youtu.be

Online shop: www.carymart.com

Caution:

Any inflammable and explosives material must be far away when igniting fireworks.

Anyone is far away from the firework more than 50m when it is ignited.

Firework Igniter Ignited by Remote Control Firework System

Glorious fireworks shine in the color of the night, which look like flowers in bloom.

However, it is dangerous to ignite fireworks in short distance. To reduce potential danger of skin burn, the best choice for Igniting firework is to use the remote controller.

We try to demonstrate how to use the firework ignitor system to ignite electric igniter for firework.

First, we prepare receiver box of firework ignitor system and 1 transmitter as well as 1 electric igniter.

Connection and Operation:

Connect two wires of electric igniter to red and black terminals of the receiver.

Switch on the receiver after connections.

Press button, ignite electric igniter.

Short Video:

http://www.youtube.com/watch?v=IQJYXXqiNvI&feature=youtu.be

Online shop: www.carymart.com

Caution:

Any inflammable and explosives material must be far away when igniting fireworks.

Anyone is far away from the firework more than 50m when it is ignited.

Electric Firework Ignitor with Remote Control Firework System

People always launch fireworks to celebrate festivals or large events all over the world. Dazzling fireworks bring us splendid visual sense. But at the same time, they bring some accidents when they are improper used. To reduce potential danger of skin burn and accidental explosions, we can use remote control system to ignite fireworks. That will be a better method to enjoy launching fireworks in festivals.

We will try to demonstrate our new series firework ignited system one by one with short articles and short videos.

1 channel firework ignitor system to ignite electric firework.
1 channel firework ignitor system to ignite electric igniter.
2 channels firework ignitor system to ignite electric fireworks.
2 channels firework ignitor system to ignite electric igniters.

The first demonstration is the 1 channel firework ignitor system launch electric firework.

Material preparation:

1× receiver box of firework ignitor system

1×transmitter

1×electric firework

Connection and Operation:

Connect two wires of electric firework to red and black terminals of the receiver.

Switch on the receiver after connections.

Press button, ignite firework.

Short Video for 1 channel firework ignitor system to ignite electric firework.

http://www.youtube.com/watch?v=OtoS-b6G9aI&feature=youtu.be

Online shop: www.carymart.com

Caution:

Any inflammable and explosives material must be far away when igniting fireworks.

Anyone is far away from the firework more than 50m when it is ignited.

Voltage Input Triggered Remote Control Design to Applying to Device Control another Device

I need a device that can connect to an existing 110V light switch. When the light switch is ON, the device sends a wireless signal to another 110V outlet to turn on a light that is plugged into that outlet. When the 110V light switch is OFF, the device turns the outlet off.

A：

This device, which is pointed out above, is more likely our brand new product, CB-2V. The characteristic of the transmitter CB-2V will be triggered by DC power 5~28V input.

According the requirement from customer, we will try to give a demonstration of our 1 channel 2000M voltage input triggered rf remote control set to show how it works.

Material preparation:

1 x transmitter, CB-2V

1 x receiver, S1X-AC220-ANT2

2 x lights

1 x adaptor

1 x power strip

Power supply

Let’s see the wiring procedure.

Step 1

We connect the transmitter to the 12V adaptor and plug lamp 2 to power strip.

Plug the transmitter to power strip.

Step 2

We connect lamp 1 to the receiver and connect the plug to the receiver.

When pressing the button on the power strip, the lamp is on and the transmitter CB-2V sends a wireless signal “ON” to the receiver S1X-AC220-ANT2, it will make another lamp on.

When pressing the button on the power strip again, the lamp is off and transmitter CB-2V sends a wireless signal “OFF” to the receiver S1X-AC220-ANT2, it turns another lamp off.

http://www.youtube.com/watch?v=mqDJ2RqElQQ&feature=youtu.be

Online shop: www.carymart.com