wireless control – Remote Control Everything

Two Single Channel Transmitters Remote Control Two Relays on One Receiver

Question from customer:

I need a 2 channel receiver with 2 remotes 1 channel. One remote control activates the channel A receiver on the receiver and another remote to turn on the channel B on the receiver. Is it possible with the CWB-1 model? And which receiver would like to recommend?

Answer:

We recommend 2 channel 12V multi-mode receiver (S2U-DC12) and two waterproof wireless 50m remotes (CWB-1). We set configured code for them so that they can work together. The receiver is 12V activated and has two relays. When it works with that transmitter, its transmission distance can reach 50m in the open air. There is only one button on each transmitter.

It can control lights, motors, fans, electrically operated doors / locks / windows / blinds / cars or other appliances with AC110~240V or DC0~28V. You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors, doors and other obstacles.

We will take a dc lamp wiring method as an example.

A,B terminals is normally closed. B,C terminals is normally open.

Wire two lamps to B&C terminals of each relay. Do as following picture shown.

Usage:

Setting control mode Toggle: Only connect Jumper-2.

Press the first remote -> lamp 1 is On; Press the first remote again -> lamp 1 is Off.

Press the second remote -> lamp 2 is On; Press the second remote again -> lamp 2 is Off.

Setting control mode Momentary: Only connect Jumper-1.

Press and hold the first remote -> lamp 1 is On; Release the first remote -> lamp 1 is Off.

Press and hold the second remote -> lamp 2 is On; Release the second remote -> lamp 2 is Off.

Setting control mode Latched: Disconnect Jumper-1 and Jumper-2.

Press -> On, another relay Off; Press another button -> Off.

Setting control mode Momentary + Toggle: Connect Jumper-1 and Jumper-2.

Control mode Momentary (Channel 1): Press -> On; Press again -> Off.

Control mode Toggle (Channel 2): Press and hold -> On; Release -> Off.

DC Remote Module Controls AC Motors—12 Channel

RF remote control transmitter & receiver model of 0020204 (S12CA-DC09/12/24 & CV-12) includes one 12-button remote transmitter and one 12-channel receiver. Each remote button controls each channel of receiver on and off. It can be used to control at most 12 same or different on / off electrical devices. Remote distance is up to 500m. It is widely applied for remote controlling on / off electrical devices such as lights, fans, electric door locks, etc. When you want to control many devices with one transmitter, we think this multi-channel remote control is very favorable. It is powered by direct current (DC). But we still can use it to control alternating current (AC) motors here. We can not only switch on or off motors but also control them forward-reverse rotation.

Look at the following show.

First off all, we prepare material.

1×12CH rf receiver

1×12-button transmitter

2×AC motor

Some lines

Power supply 220V

Here is the wiring diagram. This is the AC motor’s wiring. Motors should be connected to common terminals of B. We add neutral wires to connect both motors since they are ac motors. Live wires are connected to normally open terminals of C. (We choose 4 channel to control 2 motors as example)

We suggest setting “Momentary Mode” for motor control. Only connect Jumper-1. It is an easy operation.

Press and hold button 1, motor 1 rotates in positive direction. Release the button, motor stops.

Press and hold button 2, motor 1 rotates in reversal direction. Release the button, motor stops.

Press and hold button 3, motor 2 rotates in positive direction. Release the button, motor stops.

Press and hold button 4 , motor 2rotates in reversal direction. Release the button, motor stops.

Operational Video:

10amp AC Remote Switch Controls AC Motors’ Rotation

This 6 channel AC triggered remote control is easy to install and use. It is capable of controlling lights, motors, fans, electrically operated doors/locks/windows/blinds/cars or other appliances with AC110~240V or DC0~28V. As for 6 channels, it can control six devices simultaneously at most. With 500m working distance, you can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance. The wireless RF signal can pass through walls, floors, doors or other obstacles. Universal input: support voltage of AC110V (100V~120V), widely used in US, Canada… and voltage of AC220V (200V~240V), used in UK, France…

We will try to show you how to control positive and reversal rotation of two AC motors with 6 channel AC remote module. We will use four of all relays. Let’s see the following material.

1×6CH rf receiver

1×6-button transmitter

2×AC motor

Some lines

Power supply 220V

We suggest setting “Momentary Mode” for motor control. Only connect Jumper-1. It is an easy operation.

Press and hold button 1, motor 1 rotates in positive direction. Release the button, motor stops.

Press and hold button 3, motor 1 rotates in reversal direction. Release the button, motor stops.

Press and hold button 2, motor 2 rotates in positive direction. Release the button, motor stops.

Press and hold button 4, motor 2 rotates in positive direction. Release the button, motor stops.

Operational Video:

6 Stage Lights Remotely Controllable by One controller

Question from customer:

For a stage, I must achieve six lights to be wirelessly and remotely controllable. These “lights” will be placed in wooden cubes perforated, which will be moved on stage, and must be turned on and off from the technical table located 10 to 15 meters scene.

Answer:

We pick out this control kit from one-to- many control series. One transmitter and 6 receivers can solve this problem. In one-to-many control series, receiver can pair with stage lights you want to control by using a transmitter. With one transmitter at hand you will control stage lights at ease. There is no need to walk back and forth to switch on or off stage lights.

Those 6 receivers connect to 6 lights respectively.

Press button 1, switch stage light 1 on and off.

Press button 2, switch stage light2 on and off.

…

Press button 6, switch stage light 6 on and off.

Now, is one-to-many series remote controller kit not your better choice?

Online shop: www.carymart.com