2 Channel Remote Control 2 Lights in Basement

Recently, one of our customer wrote to us that she wanted to remote control two lights in the basement from the first floor. But she was afraid that the scope of the transmitting was too large. She could not control those lights leisurely and carefree. She asked us about suggestion.

We would like to recommend this kind of 2 channel long range remote control with external magnetic mount antenna.

S2X-AC220-ANT2+CB-2copy

At first, you can do some wiring according to our application circuit.

application circuit

Operation:

You can choose “Toggle Mode”. Only connect Jumper-2.

Press big button: Turn on the light 1. Press big button again: Turn off the light 1.

Press small button: Turn on the light 2. Press small button again: Turn off the light 2.

That is so easy to operate.

Basement

 

6 Stage Lights Remotely Controllable by One controller

Question from customer:

For a stage, I must achieve six lights to be wirelessly and remotely controllable. These “lights” will be placed in wooden cubes perforated, which will be moved on stage, and must be turned on and off from the technical table located 10 to 15 meters scene.

stage lightingstage lighting 2

Answer:

We pick out this control kit from one-to- many control series. One transmitter and 6 receivers can solve this problem. In one-to-many control series, receiver can pair with stage lights you want to control by using a transmitter. With one transmitter at hand you will control stage lights at ease. There is no need to walk back and forth to switch on or off stage lights.

001copy102copy

one to many

Those 6 receivers connect to 6 lights respectively.

Press button 1, switch stage light 1 on and off.

Press button 2, switch stage light2 on and off.

Press button 6, switch stage light 6 on and off.

Now, is one-to-many series remote controller kit not your better choice?

Online shop: www.carymart.com

Trailer Lights Controlled by Remote controller

In scorching summer, many a families will drive to seashore with their boats to be ready to sail on the sea with joy. Usually, most of them put their boat to the trailer which is pulled by a car or other vehicle. Sometimes, people intend to add a trailer to their car or other vehicle by themselves. They are keen on this refit.

trailertrailer and boat

However, the boat on the trailer will shelter from lights of car or other vehicle. People who drive back from you cannot judge whether you want to turn or brake.

trailer and boat1 (2)

 

Wireless remote controller is exactly helpful for this situation. You don’t have to do some complicated wirings when you decide to add a trailer at the end of your car or other vehicle. This handy, foolproof and available remote controller is your better choice. This remote controller set has two parts. One is the wireless transmitter module, the other is a receiver box. We can use wireless transmitter module and a receiver box to solve this problem.

102copy105copy

We use module above to connect to car or trunk’s lights, and then connect receiver lights of trailer. One module and a receiver above can be applied a pair of lights of car and trailer respectively. You can connect lights as many as you want to control with two or more control kits.

 

1_09

 

When you switch on the car or other vehicles’ lights, “ON” signal will be sent to the receiver to switch on the lights of trailer. Then switch off lights, switch off the trailer’s lights.

Online shop: www.carymart.com

1 Transmitter and 8 Receivers RF Long Range Control System Switch 8 Lights On and Off

Q:

I am an electrical supervisor for Acorn Lighting Services based in UK. We are a big installer of festive lighting and have been asked by some of our clients if we can supply remote switch to turn on and off all the lights which are controlled at the same time. Now I need 1 transmitter and 8 receivers all working on the same channel. The receivers will need to 240v and be capable of controlling 980 watts lights totally. Can you supply a remote control system where there is one transmitter and 8 receiver units with antenna?

A:

We recommend the long rang one to many  rf remote control kit.

1_01

This control system operating voltage is AC110~240V. It is very favorable for this customer’s need.

They are long range remote control kit with external extended antenna.

According to this customer’s requirement, we will provide him with 1 transmitter and 8 receivers to control 8 lights simultaneously. (The following picture showed what he wanted)

8S1X-AC-ANT2+1CB-2

So each of receivers will be paired with a light.

Wiring operation is also fairly simple.

Let’s do some demonstration in practice. First, we prepare a transmitter, two receivers and two lights. Next, we will try to show how to control two lights at the same time.

Wires from light are supposed to be connected to the output terminal of the receiver. We do it one by one. And receivers must be all powered by power supply.

Pressing the big button, 2 lights will be turned on simultaneously.

CB-2同时控制两个S1X-AC-ANT2-灯亮

Pressing the small button, 2lights will be turned off at the same time.

CB-2同时控制两个S1X-AC-ANT2-灯灭

Online shop: www.carymart.com

One transmitter and 6 receivers remote control 6 lights in football field

Our company specializes in researching and developing remote control system for home appliances and industrial devices. Our products are popular among people who are keen on refitting some devices with remote controller. They come to us to search any products which will meet their needs.

A football field administrator is looking for to remote control his 6 lights in the football field because he doesn’t want to switch the manual switches one by one in the control room. He really needs a set of rf long range remote control system.

He wants to control 6 lights in the football field simultaneously like the following picture:

football

Here are the transmitter and receiver we selected for him:

1_01copy

Each receiver has antenna so that it can receive the signal far away from the transmitter. The distance is about 1000m in an open ground. So it is quite favorable for football field.

According to his requirement, we prepare 6 receivers to connected 6 lights separately.

S1X-DC12&CB-2

Wires from the light should be connected to A&B terminals of receiver. 12 DC power should power to the receiver.

S1X-DC连接射灯

Pressing the big button, 6 lights are turned on.

Pressing the small button, 6 lights are turned off.

After using this kind of remote controller, he will control those 6 lights in this football field at ease at night.

Online shop: www.carymart.com/