rf remote control – Page 5 – Remote Control Everything

1 Transmitter and 8 Receivers RF Long Range Control System Switch 8 Lights On and Off

I am an electrical supervisor for Acorn Lighting Services based in UK. We are a big installer of festive lighting and have been asked by some of our clients if we can supply remote switch to turn on and off all the lights which are controlled at the same time. Now I need 1 transmitter and 8 receivers all working on the same channel. The receivers will need to 240v and be capable of controlling 980 watts lights totally. Can you supply a remote control system where there is one transmitter and 8 receiver units with antenna?

We recommend the long rang one to many rf remote control kit.

This control system operating voltage is AC110~240V. It is very favorable for this customer’s need.

They are long range remote control kit with external extended antenna.

According to this customer’s requirement, we will provide him with 1 transmitter and 8 receivers to control 8 lights simultaneously. (The following picture showed what he wanted)

So each of receivers will be paired with a light.

Wiring operation is also fairly simple.

Let’s do some demonstration in practice. First, we prepare a transmitter, two receivers and two lights. Next, we will try to show how to control two lights at the same time.

Wires from light are supposed to be connected to the output terminal of the receiver. We do it one by one. And receivers must be all powered by power supply.

Pressing the big button, 2 lights will be turned on simultaneously.

Pressing the small button, 2lights will be turned off at the same time.

Online shop: www.carymart.com

Long Range Wireless Remote Control 3 phase Power Water Pump

I have a pump that supplies my farm with water. The motor on the pump is 3.7kw and is 3 phase power. The pump fills a 5000 litre tank which lasts about a day. The on-off switch is roughly 400m away from my house (no line of sight, lots of trees in-between). Would I be able to connect it to the switch so that I can switch the pump on and off from home 400m away?

We recommend this long range AC latched rf remote control system.

With external extended antenna, this remote control unit can be long range controller. Transmitting distance is about 2000m. How to remote control 3 phase power water pump? Besides the transmitter and receiver, we should prepare a relay which is applied to the pump.

Step 1, the relay should be connected to the receiver. Then three live wires are connected to the relay and 3 phase power supply.

Step 2, another three live wires to connected the relay and water pump.

Step 3, power to the receiver. Pressing the big button of the transmitter, the receiver will receive an “ON” signal to instruct the reply and pump to work. Pressing the small button of the transmitter, the receiver will receive an “OFF” signal to instruct the reply and pump stop working.

Online shop: www.carymart.com/

One transmitter and 6 receivers remote control 6 lights in football field

Our company specializes in researching and developing remote control system for home appliances and industrial devices. Our products are popular among people who are keen on refitting some devices with remote controller. They come to us to search any products which will meet their needs.

A football field administrator is looking for to remote control his 6 lights in the football field because he doesn’t want to switch the manual switches one by one in the control room. He really needs a set of rf long range remote control system.

He wants to control 6 lights in the football field simultaneously like the following picture:

Here are the transmitter and receiver we selected for him:

Each receiver has antenna so that it can receive the signal far away from the transmitter. The distance is about 1000m in an open ground. So it is quite favorable for football field.

According to his requirement, we prepare 6 receivers to connected 6 lights separately.

Wires from the light should be connected to A&B terminals of receiver. 12 DC power should power to the receiver.

Pressing the big button, 6 lights are turned on.

Pressing the small button, 6 lights are turned off.

After using this kind of remote controller, he will control those 6 lights in this football field at ease at night.

Online shop: www.carymart.com/

How to control an 2400 watts electric heater remotely

Electrical heater is widely used in many families in cold weather. Have you ever considered that you control your electrical heater by remote controller? Someone is looking for a remote controller with toggle mode to switch on and off his 2400 watts electrical heater (240V). He came to our online shop to find this remote controller S1PT-AC220 and C-1.

Let’s show how they work.

First, wire a power strip to the receiver and power supply.

Second, the receiver is powered by power supply.

Third, plug the electrical heater to that power strip.

Pressing the button, the electrical heater is turned on.

Pressing the button again, the electrical heater is turned off.

Online shop: www.carymart.com/

How to Wirelessly Remote Control Car LED Tail Lamp

Sometimes, cars or trucks are refitted to meet your need. Recently, one of our customers refitted his car, so two tail lamps must be moved to another position from original position. He came up with a great idea that he would like to change wired LED tail lamp to wireless remote control LED tail lamp in the car. He came to us to look for the remote control system product. We select the following kind of rf remote control kit. They are SIX-DC12 and CB-2V.

The characteristic of the transmitter CB-2V will be triggered by DC power 5~28V input.

We are very interested in this idea that we decide to simulate wireless remote control LED tail lamp in the car.

In the beginning, we will prepare the following items:

1x LED lamp

1x manual switch

1x transmitter

1x receiver

Power supply

We would like to simulate the operation of LED lamp in the car initially. LED lamp should be connected to power supply and a manual switch.

Usually, we switch the manual switch to turn the light on and off just like we control the tail lamp in the car.

Now, we start to operate how to wirelessly remote control LED lamp. First, the transmitter is supposed to be connected to power supply and that manual switch.

Second, LED light should be connected to receiver.

Third, we switch on the manual switch and the transmitter will send an “ON” signal to the receiver. The receiver receives the signal to instruct the light to turn on.

Fourth, we switch off the manual switch and the transmitter will send an “OFF” signal to the receiver. The receiver receives the signal to instruct the light to turn off.

http://www.youtube.com/watch?v=3Gk6qeUPjiU

Online shop: www.carymart.com/