remote control – Page 3 – Remote Control Everything

Customized Digital Circuit Board Remote Control DC Motor

This digital tube circuit features in manual control and remote control. There are two working modes in it. We will switch modes through inserting or not inserting pin to jumper. From right side to left side of this board, they are power input terminals, power output terminals, four buttons: (SET), S2(+), S3(-), S4(LEARNING BUTTON) for setting or adjusting, manual switch jumper, pin jumper.

This is board can be a reversing controller, with forward-reverse-stop capability. You can rotate the motor in positive or reversal direction with the transmitter (remote control) from any place within a reliable distance, wireless rf signal can pass through walls, floors and doors. But now only DC power is available. It is suitable for the motors of blind, rolling door, projection screen, awning, winch or other appliances and mechanicals.

Just wire DC motor to Output terminals of circuit board and supply power to circuit board.

Insert pin to jumper: Press and hold the “▲” button, motor rotate in positive rotation; release the “▲” button, motor stops. Press and hold the “▼” button, motor rotates in reverse direction; release the “▼” button, motor stops.

Do not insert pin to jumper: Press the “▲” button, motor rotate in positive rotation; press the “■” button, motor stops. Press the “▼” button, motor rotates in reverse direction; press the “■” button, motor stops.

The following video is for your reference.

Temperature Controlling Digital Tube

This is the digital display tube circuit board. There are several buttons and terminals at circuit board. They are 12VDC power input and output terminals, 4 buttons S1 (SET), S2(+), S3(-), S4(LEARNING BUTTON), manual switch, temperature sensor and jumper from right to left.

There are 3 controlling methods in it. They are manual switch control function, remote control function and temperature sensor control function. At first, we will introduce the code learning and manual switch control function.

Code Learning:

1) Press button S4; signal LED on the controller keeps shining. The controller enters into status of LEARNING.

2) Press any one button on remote control. If signal LED flashes quickly 5 times and turns off, it means learning is successful.

3) When controller is in the status of LEARNING, press again button S4, signal LED turns off, learning process will be discontinued.

4) The controller can learn several remote controls with different codes.

We have learned remote control to the controller. If you don’t want the controller to work with the remote control, you can delete all codes of remote controls, which are stored in the controller.

Operation: Press and hold S4 until signal LED flashes slowly; release the button, LED keeps slow flash. That means all stored codes have been deleted successfully.

Manual switch: to control positive, reverse rotation and stop of motor.

Working method: Move to “positive rotation” position, motor rotates in positive direction; move to “Stop” position, motor stops; move to “reverse rotation” position, motor rotates in reverse direction.

Here are two videos for your reference.

Code Learning Video:

Manual Switch Control Motor Video:

3 Frequency&3 Band GSM Power Strip

This tri-frequency/tri-band GSM smart power socket has manual control, state checking function and power-off memory function other than phone call remote control and SMS remote control.

Manual Control

Press buttons SW1/SW2/SW3 on the socket directly to remote control the socket. Press SW1, socket 1 is socket 1 is power-on state. Press SW1 again, socket 1 is power-off state. Press SW2, socket 2 is power-on state. Press SW2 again, socket 2 is power-off state. Press SW3, socket 3 is power-on state. Press SW3 again, socket 3 is power-off state. When devices are plugged into sockets, only press buttons on the socket, you can switch on or off those devices.

CHECK command: Check the state of the socket

Edit text message “SN+ Six passwords +CHECK” and send to socket. You will receive the state of the socket. Then you will know the ON or OFF state of each socket.

Power-off Memory Function of Socket

The power-off memory function of socket is default in socket.

The STA 1 light flashes twice after power is on. It means that the state is power-off memory function is saved.

The STA 1 light flashes 4 times after power is on. It means that the state is power-off memory function is not saved.

Power-off state can be changed by the customer. Press SW1 for 12 seconds then release, you can change the current memory state.

Note:

This product can only control power supply on or off and do not have other functions. If some devices don’t have power-off memory function of it, even you want to start it by using this socket, it won’t work immediately. You have to turn on its own switch to restart it.

Reset to default

Press the SET button and SW1 button at the same time for 1 second, the STA1 light will flashes twice slowly. You reset socket successfully.

The previous preset owner number will be deleted and password becomes six zeros: 000000. The three switches are also disconnected.

Short Text Message Remote Controls Electric Devices

We can send short text message to remote control electric devices through GSM smart power strip besides telephone call.

After setting owner password, you can send short text message via your mobile phone to switch on and off devices which are plugged into the smart strip.

1.(COM command; ON command; OFF command)

Edit text message “SN+ Six Passwords +COM +three sockets’ codes” and send to socket (for example, SN000000COM+SW1ON, SW2OFF, SW3ON). You will receive a message for socket if you set successfully. According to your choice, this first socket (SW1) is ON, the second socket (SW2) is OFF, the third socket (SW3) is ON.

2.Three switches all on:

Edit text message “SN+ six passwords +ON” and send to socket. You will receive a message for socket if you set successfully. According to your choice, this first socket (SW1) is ON, the second socket (SW2) is ON, the third socket (SW3) is ON.

3. Three switches all off:

Edit text message “SN+ six passwords +OFF” and send to socket. You will receive a message for socket if you set successfully. According to your choice, this first socket (SW1) is OFF, the second socket (SW2) is OFF, the third socket (SW3) is OFF.

The socket status will be on and off according to your short text message command. When the device is plugged into the corresponding socket, it can be turned ON or OFF according to your short text message command.

Note:

This product can only control power supply on or off and do not have other functions. For some electric appliances, such as some air-conditioners don’t maintain the memory function of power-off, if you turn on them again, it won’t work immediately. For most of the TVs, stereos can work immediately after you turn on them again.

Cell Phone Remote Controlling Socket

Our new product mobile phone GSM smart power strip is used in many fields, for example industry or household. It is applied to air conditioner, electric heaters, water pump, motors, fans, servers, relay station, TVs, water heaters, electric doors, rice cookers, lamps, speakers or other devices with voltage AC110~220V. Or something special remote controlling, you can also feed your pet via this GSM switch. How to use this socket on earth? Let’s see the following procedure.

Here we want to introduce “Phone call Remote Controlling” method.

When you use the owner number to dial, the phone will be gotten through after 2 seconds. Voice prompt: “Welcome to use the smart socket. Please enter the password and end up with “octothorp”. Then do follow the voice prompt. When your password is correct, the voice prompts is “The password is correct”. If your password is correct, you can remote control devices which are plugged into those sockets via your mobile phone or fix telephone. This product can only control power supply on or off and do not have other functions. So you can only turn on and off devices.

When you input the password with illegal format or even wrong password, the voice prompts is “The password is wrong, please input again” .You are allowed to input password incorrectly three times. If more than three times, the voice prompt is: “Thank you for using, goodbye” and hang up after 2 seconds.

Attention: Socket can be controlled many times. When you want to stop controlling, press asterisk (star key) and octothorp (hash key), the voice prompts is “Thank you for using, goodbye” and hang up after 2 seconds.