We can send short text message to remote control electric devices through GSM smart power strip besides telephone call.
After setting owner password, you can send short text message via your mobile phone to switch on and off devices which are plugged into the smart strip.
1.(COM command; ON command; OFF command)
Edit text message “SN+ Six Passwords +COM +three sockets’ codes” and send to socket (for example, SN000000COM+SW1ON, SW2OFF, SW3ON). You will receive a message for socket if you set successfully. According to your choice, this first socket (SW1) is ON, the second socket (SW2) is OFF, the third socket (SW3) is ON.
2.Three switches all on:
Edit text message “SN+ six passwords +ON” and send to socket. You will receive a message for socket if you set successfully. According to your choice, this first socket (SW1) is ON, the second socket (SW2) is ON, the third socket (SW3) is ON.
3. Three switches all off:
Edit text message “SN+ six passwords +OFF” and send to socket. You will receive a message for socket if you set successfully. According to your choice, this first socket (SW1) is OFF, the second socket (SW2) is OFF, the third socket (SW3) is OFF.
The socket status will be on and off according to your short text message command. When the device is plugged into the corresponding socket, it can be turned ON or OFF according to your short text message command.
Note:
This product can only control power supply on or off and do not have other functions. For some electric appliances, such as some air-conditioners don’t maintain the memory function of power-off, if you turn on them again, it won’t work immediately. For most of the TVs, stereos can work immediately after you turn on them again.
Follow