mobile phone – Remote Control Everything

WIFI Controller and Mobile Phone Remote Control Linear Actuator

A linear actuator is an actuator which creates motion in straight line and applied in machine tools, industry, valves, disk driver, dentist’s chair… Maybe, it will be used at home, such as massage chair, electric sky lights, truck… Have you ever thought that you can use mobile phone to remote control your linear actuator motor in WIFI network? Absolutely you can do it with help of our mobile phone WIFI controller. Also we have linear actuator. We will show you how to realize that remote controlling procedure. Here is the material we should prepare.

1×WIFI controller (WF-8-1R)

1×mobile phone

1×12VDC Linear Actuator Motor

1×9VDC 1A Power Adapter (for WIFI controller)

1×12VDC 3A Power Adapter (for linear actuator )

Wires

The WIFI controller is normally open/ closed contact. The wiring is like this.

A, B terminals are normally closed; B, C terminals are normally closed. Two wires of linear actuator are wired to common terminals B of relay 1 and relay 2 respectively. C terminals are supposed to wire to positive pole of power adaptor. B terminals are supposed to wire to negative pole of power adaptor.

After switching on power, the first LED is on. This is the power LED. Waiting for a while, we connect mobile phone WiFi when the WIFI start-up LED shines (the second LED). After a while, WiFi connection status LED shines when the WiFi connection is successful. We press control software icon which is installed in the mobile phone in advance to enter operated status. And press the “connect” from the top right corner.

Set Momentary control mode for relay 1 and relay 2: Click the ▼ icon of 1&2 channels. Choose M (Momentary) control mode for each channel.

Press and hold button 1, motor shaft extends. Release button 1, motor shaft stops.

Press and hold button 2, motor shaft retracts. Release button 2, motor shaft stops.

Video

Short Text Message Remote Controls Electric Devices

We can send short text message to remote control electric devices through GSM smart power strip besides telephone call.

After setting owner password, you can send short text message via your mobile phone to switch on and off devices which are plugged into the smart strip.

1.(COM command; ON command; OFF command)

Edit text message “SN+ Six Passwords +COM +three sockets’ codes” and send to socket (for example, SN000000COM+SW1ON, SW2OFF, SW3ON). You will receive a message for socket if you set successfully. According to your choice, this first socket (SW1) is ON, the second socket (SW2) is OFF, the third socket (SW3) is ON.

2.Three switches all on:

Edit text message “SN+ six passwords +ON” and send to socket. You will receive a message for socket if you set successfully. According to your choice, this first socket (SW1) is ON, the second socket (SW2) is ON, the third socket (SW3) is ON.

3. Three switches all off:

Edit text message “SN+ six passwords +OFF” and send to socket. You will receive a message for socket if you set successfully. According to your choice, this first socket (SW1) is OFF, the second socket (SW2) is OFF, the third socket (SW3) is OFF.

The socket status will be on and off according to your short text message command. When the device is plugged into the corresponding socket, it can be turned ON or OFF according to your short text message command.

Note:

This product can only control power supply on or off and do not have other functions. For some electric appliances, such as some air-conditioners don’t maintain the memory function of power-off, if you turn on them again, it won’t work immediately. For most of the TVs, stereos can work immediately after you turn on them again.

Mobile Phone WIFI Controller for Drawer Lock—Android App

When you unlock your drawer lock, maybe you will take out the mechanical key and unlock the mechanical drawer lock as usual. At this very moment, have you imaged that you can use mobile WIFI to unlock drawer lock? It is quite convenient, easy and leisurely. Mobile phone WiFi controller, which is our brand new product, is working at WiFi network which has 8 relays to connect 8 devices. With external extended antenna, it is a long distance controller. Another advantage of it is to penetrate through walls, doors or other obstacles. Let’s see how to do with it.

First, we prepare materials and do some wiring.

1×WiFi controller (WF-8-1R)

1×mobile phone (Android System)

1×electric drawer lock

Power supply

Some lines

This is the simple wiring. We connect drawer lock to the receiver’s power with lines. That is to say ,the receiver can supply power to drawer lock.

After simple wiring, we switch on the power. The power LED light is on. With the shining of the WiFi start-up LED light, we turn on WiFi of mobile phone. The WiFi connection status LED light is on. We press the control software installed in the mobile phone and press the ”Connect”.

Press button 1, drawer is unlocked; Open the drawer.

Press button 1 again, lock the drawer.

Operation Video: