Switching LED Strip Light Off/On with Motion Detectors and Time Delay Receiver


I would like to control a 12V LED strip light with 2 motion detectors. When the detectors detect the movement of up and down, they will turn on the led strip light.


We recommend two motion detectors (W-01) and 1 channel time delay receiver (S1DA-DC12).

Motion detectors can be installed to the wall easily with screws to different places. Detector working distance will be 100m (Open field). Detection distance is 10m. With characteristics of time delay, its time adjustment range can be 0 second~99 hours. It has normally open and closed contact, so all device which works under AC 110~240V or DC 0~28V and working current is less than 10A can be wired to that receiver.


You can connect the LED strip to B&C contact of the receiver. Switch on the power, when any one detector is triggered, the receiver will turn on the strip. After the delay time, the receiver will turn off the strip. You can set this delay time, such as 30 seconds or 1 minute or other time you to set.


Leave a Reply