time delay receiver – Remote Control Everything

Question from customer:

“I would like to control my hot water recirculation pump via remote control with time delay. I would like one receiver unit that can provide 4 different time delays (i.e. #1 1 minute, #2 2 minutes, #3 for 3 minutes, #4 for 4 minutes) via 4 different transmitters. Do you have such a product?”

Answer:

We think that you may need two time adjustable ac receivers and a 4-button transmitter (S2DA-AC220&C-4). The receiver is relay output (normally open and normally closed). Power supply for the receiver and the water pump are different. They can turn off automatically after the delay time(0 seconds ~ 99 hours), this RF wireless remote control switch system should be a good choice for you to control your all kinds of DC 0-28V or AC110 ~ 240V electrical appliances at home!

You can wire 4 pumps to 4 different relays of two receivers respectively.

Press buttons of “＋” and “－” on the timer from two receivers, adjust delay time from 0 second to 99 hours. Two buttons of Timer 1 adjust delay time of relay 1; two buttons of Timer 2 adjust delay time of relay 2. “H” is Hour, “M” is Minute, and “S” is Second. For example, if you set “1 0 M 0 3” on Timer, it means the delay time on Timer 1 is 3 minutes; the delay time on Timer 2 is 10 minutes.

Set relay 1 for 1 minute; relay 2 for 2 minutes; relay 3 for 3 minutes; relay 4 for 4 minutes.

So for the first receiver, you can set “02M01”; for the second receiver, you can set “04M03”.

And press button 1 turn on, pump 1.

Press button 2 turn on, pump 2.

Press button 3 turn on, pump 3.

Press button 4 turn on, pump 4.

After preset delay time, they will turn off automatically. If you want to turn off pump immediately, you can press button again for each pump to turn off them at once.

Overview:

I would like to control a 12V LED strip light with 2 motion detectors. When the detectors detect the movement of up and down, they will turn on the led strip light.

Solution:

We recommend two motion detectors (W-01) and 1 channel time delay receiver (S1DA-DC12).

Motion detectors can be installed to the wall easily with screws to different places. Detector working distance will be 100m (Open field). Detection distance is 10m. With characteristics of time delay, its time adjustment range can be 0 second~99 hours. It has normally open and closed contact, so all device which works under AC 110~240V or DC 0~28V and working current is less than 10A can be wired to that receiver.

You can connect the LED strip to B&C contact of the receiver. Switch on the power, when any one detector is triggered, the receiver will turn on the strip. After the delay time, the receiver will turn off the strip. You can set this delay time, such as 30 seconds or 1 minute or other time you to set.

Tag: time delay receiver

Time Delay Remote controller Activates Hot Water Recirculation Pump

Switching LED Strip Light Off/On with Motion Detectors and Time Delay Receiver