remote control lamp on/off – Remote Control Everything

How to Remote Control 4 AC Lamps Off/On

2000M long range 4CH AC power output remote control kit (S4X-AC220-ANT2+CB-4L) is recommended here. 4-button transmitter is compatible with 4 channel receiver. One button is to its correspondent channel. You can connect 4 lamps to receiver. This remote is 220VAC power output so you have not to supply any power to controlled lamps. With external extended antenna, the transmission distance reach 2000m in the open field.

Here is the wiring diagram. You can connect 4 AC lamps to “A&B” output terminals of receiver. Then supply power to receiver.

Setting “Toggle Mode” Only connect Jumper-2 with a little jumper.

Press button A, turn on lamp 1; Press button A again, turn off lamp 1.

Press button B, turn on lamp 2; Press button B again, turn off lamp 2.

Press button C, turn on lamp 3; Press button C again, turn off lamp 3.

Press button D, turn on lamp 4; Press button D again, turn off lamp 4.

Remote Controller is Applied to LED Lamp for Decoration

When you use led lamps to decorate your bed room, your balcony, your garden, your yard or do something glowing Christmas lighting ornament outdoor, you must be very tired with complex wiring, we try to make those wiring procedure easier.

A wireless wall-mounted switch and dc output receiver can be a new remote control unit (S1X-DC12&HR-1). It is dc power output so you can use it to control DC 0～28V actuated electrical devices off/on. This wall mounted switch is like ordinary wall switch from appearance, but it is wireless and operated by RF signal that can pass through walls, floors and doors. It is be affix to any place you want by double faced adhesive tape. The switch works with DC power output receiver, you LED lamps can wired to output terminals of receiver and also get power from them.

Here is the wiring diagram.

Wire dc led lamp to OUTPUT of receiver. And add power supply to receiver. This kind of receiver is designed for DC output terminals so that lamp can get power from output terminals of receiver directly as mentioned above.

Setting different control modes (We usually set toggle for lamp controlling.)

Setting control mode Toggle: Only connect Jumper-2.

Press button: Turn on the relay, terminal OUT outputs DC power, turn on led lamp.

Press button again: Turn off the relay, terminal OUT no output, turn off led lamp.

220 V relay output wireless receiver & transmitter of remote control lamps on/off

Question from customer:

My company import different led products, so for manage some led garden products and led swimming pool lamps, we need:

– system of switch with remote control who can switch on and switch off current 12 volts or 220 volts (we can install your control box before power supply if you have 220 volts system or we can install after power supply if you have only 12 volts ac system.)

Answer:

We advise you use the wireless remote control system according to your requirement. It is model: S1X-AC220 & C-2. The receiver’s (S1X-AC220) working voltage is AC100~240V. The transmitter’s(C-2) remote control distance is 100m/300ft theoretically. The transmitter controls the receiver. If you mount the receiver to the equipment which will be controlled, the wireless transmitter can turn on/off the equipment by remote control the receiver. For example, you can mount receiver to your swimming pool lamps, then you can turn on/off the lamps through pressing the buttons in the transmitter.

Besides, the system can also control motors, fans, electrically operated doors /locks/ windows/blinds/cars or other appliances with AC 100~240V. When you remote control the appliances, the transmitter can launch wireless RF signal to the receiver. The wireless RF signal can pass through walls, floors and doors.

Here is the circuit diagram of the receiver. You can connect one lamp to the “N & L” output terminal of the receiver. Then supply power to receiver by connecting live wire and zero wire. When you press the buttons in the transmitter, you can turn on/off the lamp by wireless remote control.

There are three control modes for the wireless remote control system: toggle, momentary, latched. You can set any one mode of three control modes as following operation:

Setting control mode Toggle: Only connect Jumper-2.
Press button 1: Turn on the lamp, terminal OUT outputs AC power.
Press button 1 again: Turn off the lamp, terminal OUT no output.

Setting control mode Momentary: Only connect Jumper-1.
Press and hold button 1: Turn on the lamp terminal OUT outputs AC power.
Release button 1: Turn off the lamp, terminal OUT no output.

Setting control mode Latched: Do not connect Jumper-1 and Jumper-2.
Press button 1: Turn on the lamp, terminal OUT outputs AC power.
Press button 2: Turn off the lamp, terminal OUT no output.

Finally, you can enter into our website for knowing more something about the wireless remote control system as following:

Model: 0020392(S1X-AC220 & C-2)

Website:

http://www.carymart.com/

http://www.carymart.com/1ch-ac-110v-220v-power-output-radio-controlled-switch-toggle-momentary-latched-mode-p-1379.html