Question from customer:
My company import different led products, so for manage some led garden products and led swimming pool lamps, we need:
– system of switch with remote control who can switch on and switch off current 12 volts or 220 volts (we can install your control box before power supply if you have 220 volts system or we can install after power supply if you have only 12 volts ac system.)
Answer:
We advise you use the wireless remote control system according to your requirement. It is model: S1X-AC220 & C-2. The receiver’s (S1X-AC220) working voltage is AC100~240V. The transmitter’s(C-2) remote control distance is 100m/300ft theoretically. The transmitter controls the receiver. If you mount the receiver to the equipment which will be controlled, the wireless transmitter can turn on/off the equipment by remote control the receiver. For example, you can mount receiver to your swimming pool lamps, then you can turn on/off the lamps through pressing the buttons in the transmitter.
Besides, the system can also control motors, fans, electrically operated doors /locks/ windows/blinds/cars or other appliances with AC 100~240V. When you remote control the appliances, the transmitter can launch wireless RF signal to the receiver. The wireless RF signal can pass through walls, floors and doors.
Here is the circuit diagram of the receiver. You can connect one lamp to the “N & L” output terminal of the receiver. Then supply power to receiver by connecting live wire and zero wire. When you press the buttons in the transmitter, you can turn on/off the lamp by wireless remote control.
There are three control modes for the wireless remote control system: toggle, momentary, latched. You can set any one mode of three control modes as following operation:
Setting control mode Toggle: Only connect Jumper-2.
Press button 1: Turn on the lamp, terminal OUT outputs AC power.
Press button 1 again: Turn off the lamp, terminal OUT no output.
Setting control mode Momentary: Only connect Jumper-1.
Press and hold button 1: Turn on the lamp terminal OUT outputs AC power.
Release button 1: Turn off the lamp, terminal OUT no output.
Setting control mode Latched: Do not connect Jumper-1 and Jumper-2.
Press button 1: Turn on the lamp, terminal OUT outputs AC power.
Press button 2: Turn off the lamp, terminal OUT no output.
Finally, you can enter into our website for knowing more something about the wireless remote control system as following:
Model: 0020392(S1X-AC220 & C-2)
Website:
Follow