15 Channel Remote Controller

Mixed-mode Remote Control Operation(15 Channel)

We designed 15 channel DC mixed- mode remote control to satisfy customers’ more need. It is still wireless control and easy to install. It can control lights, motors, fans, electrically operated doors, locks, windows, blinds, cars or other appliances with voltage AC110~240V or DC0~28V. You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless signal can pass through walls, floors and doors. It includes toggle, momentary, latched and mixed working modes.

remote control (1)

The following operation is the code learning and deleting and remote control operation. At first, we should prepare material.

1×15 channel RF receiver

1×15-button transmitter

4× AC lamp(They will be connected at channels at random, just for demonstration purposes, actually you can wire 15 lamps)

Power adaptor

S15C-DC12&CV-15-material

You can follow the wiring diagram for its wiring. Then switch on power.

circuit

S15C-DC12&CV-15-wiring

Deleting code:

We should delete all stored codes firstly. Press and hold learning button for 3 seconds, then release button after buzzer sounds 5 times. All stored codes are deleted successfully.

S15C-DC12&CV-15-delete

There are 15 channels in receiver. So it has 15 working modes in it. But we only show four common operation modes here. They are toggle, momentary, latched and toggle+ momentary+latched modes.

Learning mode:

Press and hold learning button, the receiver is in the status of learning after buzzer sounds 1 time. Press corresponding button of each working mode, for example, button 3 for toggle mode, button 1 for momentary mode, button 2 for latched, and button 9 for one of mixed modes (Toggle+ Momentary+Latched modes)

Toggle mode learning and operation:

Press and hold learning button, the receiver is in the status of learning after buzzer sounds 1 time. Press button 3 at once, buzzer sounds 3 times, the receiver learns Toggle mode successfully.

S15C-DC12&CV-15-learning

Toggle mode operation:

Press any button to control the corresponding lamp. For example, press button 1, turn on lamp 1; press button 1 again, turn off lamp 1…

S15C-DC12&CV-15-T mode lamp on

S15C-DC12&CV-15-T mode lamp off

After operation of each mode, we should delete previous stored codes in advance, and then start to learning next working mode.

Momentary mode learning and operation:

Do as toggle mode learning, Press and hold learning button, the receiver is in the status of learning after buzzer sounds 1 time. Press button 1 at once, buzzer sounds 3 times, the receiver learns Momentary mode successfully.

Press any button to control the corresponding lamp. For example, press and hold button 6, turn on lamp 6; release button 6, turn off lamp 6…

S15C-DC12&CV-15-M mode

Latched mode learning and operation:

Deleting momentary learning code, press and hold learning button, the receiver is in the status of learning after buzzer sounds 1 time. Press button 2 at once, buzzer sounds 3 times, the receiver learns latched mode successfully.

Press any button to control the corresponding lamp. For example, press button 1, turn on lamp 1, other lamps are off; press button 6, turn on lamp 6, other lamps are off…

S15C-DC12&CV-15-L mode lamp on

Mixed mode learning and operation: (Toggle+ Momentary+Latched modes)

Deleting latched learning code, press and hold learning button, the receiver is in the status of learning after buzzer sounds 1 time. Press button 9 at once, buzzer sounds 3 times, the receiver learns Toggle +Momentary + Latched mode successfully. (1~5 channel is T mode; 6~10 channel is M mode; 11~15 channel is L mode)

1~5 channel (T mode): press button 1, turn on lamp 1; press button 1 again, turn off lamp 1.

6~10 channel (M mode): press and hold button 6, turn on lamp 6; release button 6, turn off lamp 6.

11~15 channel (L mode): press button 11, turn on lamp 11, other lamps are off; press button 12, turn on lamp 12, other lamps are off.

Video: