100m – Page 5 – Remote Control Everything

Toggle AC 110V~220V Remote Control for Lamp

The 1 channel RF remote control operates in AC110V ~220V and 315/433MHz. Through retrofitting, this kind of remote control made a little changes compared with the original remote. Two kinds of receiver style, one is AC 110V (AC 100~120V), widely used in US, Canada…; the other is AC220V (AC 200~240V), used in UK, France…. The Coding type of receiver is learning code. Maximum working current for each channel is 3 ampere. The working distance is 100M.

You can control on/off, open/close of universal electrical devices. Applications include gate remote control, motor remote control, garage door remote control, light remote control, etc. We will take ac light remote controlling for an example. Look at the following wiring diagram. From the interior analogue circuit, we connect the neutral wire to the terminal “1”, and the live wire to the terminal “2”. And then connect the lamp to the terminal “5” and the neutral wire. Actually, if you wire ac motor to the lamp position of following diagram, then you can control ac motor on and off.

Toggle mode is the only working mode of it. (Toggle (Press -> On; Press again -> Off)) All you need to do is just press slightly the button on the remote. You press button to turn on lamp; press button again to turn off lamp.

Multi-Mode Motor Controller Controls DC Motor’s Rotation

Motor can be used in many places including home automation and industrial automation. Remote controlling always crosses our mind when we need to activate those motors. We specially design many kinds of controllers for motor remote controlling. This rf dc electric motor remote control system (S1FU-DC12&C-3-2) is suitable for the motors of rolling blinds / doors, awnings, winches, cranes or other home electrical devices and small industrial equipments. Working modes include toggle, momentary and latching. Easy to wire and operate. Its transmitting distance is about 100m (300ft).

We prepare a demonstration of three working modes of this kind of motor controller.

The material is as follow.

1×Receiver(S1FU-DC12)

1×transmitter(C-3-2)

1×dc motor

1×jumper

Lines

Power supply

Next step is wiring.

Switch on the power.

1. The Toggle mode setting: Only connect Jumper-2.

Control mode Toggle: Press -> Rotate; Press again -> Stop. Press button ▲: motor rotates in the positive direction.

Press button ▲ again: motor stops

Press button ▼: motor rotates in the reversal direction.

Press button ▼ again: motor stops

2. The Momentary mode setting: Only connect Jumper-1.

Control mode Momentary: Press and hold -> Rotate; Release -> Stop.

Press and hold button ▲: motor rotates in the positive direction.

Release button ▲: motor stops

Press and hold button ▼: motor rotates in the reversal direction.

Release button ▼: motor stops

3. The Latched mode setting: Do not connect Jumper-1 and Jumper-2.

Control mode Latched: Press button ▲ and ▼ -> Rotate; Press button ■ -> Stop.

Press button ▲: motor rotates in the positive direction.

Press button ▼: motor rotates in the reversal direction.

Press button ■: motor stops

1CH 30A Remote Control Kit for Pool Light

Question from customer:

On my swimming pool I have a switch to ON/OFF the light(2 x300 watt projectors on a single switch). Do you have any solution so I can remotely ON or OFF this pool light?

Answer:

Our suggestion is that you can use 1 channel AC power&30A output remote switch (S1PX-AC220+C-2). According to the description, it is 1 channel 30A remote controller with direct current output. It is applied for controlling light, motors, fans, electrically operated doors/ locks/windows/ blinds/cars or other appliances with AC100~240V. The working distance is about 100m, but if you want to prolong control distance, you can add an external extended antenna.

The wiring is very easy. Pool lamp is connected to L&N OUT terminals on the receiver. And supply AC power to another L&N terminals of the receiver. You don’t have to supply any current to pool lamp because it can get power from powered receiver.

And you will get a handy transmitter with 2 buttons. We recommend you can set Latched Mode for this controlling. Press button 1, turn on pool lamp; press button 2, turn off pool lamp.

100M Latching Remote Control AC Lamp

In daily life, remote control involves in many aspects of life which brings me more convenience. So for example, you want to turn on the basement light from this first floor. Or you want to sit in your living room and turn on your yard light a little far from your house. Or you want to switch on your dock light remotely. This latched RF remote control switch is the solution.

It will be a good choice for you since RF wireless remote control switch system is ideal for turn on / off the house lights, basement light, yard light, dock light and any other kind of light in the range of about 100 meters. You use 2 buttons remote transmitter to control devices. Moreover, you can easily control all DC 0-28V or AC110 ~ 240V other electrical appliance at home! What’s more, the remote control switch is easy to installation and user- friendly.

Let’s make a demonstration. First of all, here is the material.

1×latched remote receiver

1×2-button transmitter

1×AC lamp

Power Supply

According to the wiring diagram, we do some wiring.

After switch on power, press button 1, turn on the lamp.

Press button 2, turn off the lamp.

Operational Video:

Electric Firework Ignitor with Remote Control Firework System

People always launch fireworks to celebrate festivals or large events all over the world. Dazzling fireworks bring us splendid visual sense. But at the same time, they bring some accidents when they are improper used. To reduce potential danger of skin burn and accidental explosions, we can use remote control system to ignite fireworks. That will be a better method to enjoy launching fireworks in festivals.